Upgrade your Remington 700 with the HUNTER 700 Short Action Magazine Well! 🛠️ Enjoy easy installation and enhanced magazine capabilities.
MAGPULHUNTER 700 SHORT ACTION MAGAZINE WELL BOTTOM METAL - MAGPUL HUNTER 700 MAG WELL BOTTOM METAL FOR REMINGTON 700 SA BLACK
840815100768100016665
Top takeaways
The Magpul Bolt Action Magazine Well is a drop-in upgrade for the Magpul Remington 700 Hunter Stock that allows for the use of detachable box magazines.
No custom inletting from gunsmiths is required as it is designed to replace the OEM bottom metal and insert on the Hunter 700 Stock with a reinforced polymer trigger guard and magazine well.
Compatible with AICS pattern, short action magazines and includes a Magpul PMAG 5 AC.
Attributes
Finish:Black
Model:700
Weapon type:Remington
Delivery weight:0.259kg
Shipping height:51mm
Shipping width:140mm
Shipping length:203mm
UPC:840815100768
Item details
Made in USA
US export classification: 0A501.x
Specifications:
Finish: Black
Make: Remington
Model: 700
89.989.91GBP
89.9GBP£89.90
Prices inclusive of duty & VAT.
Product no.: 100016665
Mfr. No.: MAG497-BLK
840815100768 The Magpul Bolt Action Magazine Well is a drop-in solution for the Magpul Remington 700 Hunter Stock for those that are wishing to add detachable box magazine capabilities to their rifle. By simply removing your OEM bottom metal and the insert on the Hunter 700 Stock, users can add this reinforced polymer trigger guard and magazine well to their rifle without the need for custom inletting from gunsmiths. Designed to work with AICS pattern, short action magazines. This kit also includes the Magpul PMAG 5 AC. PLEASE NOTE: This will only fit the Magpul Remington 700 Hunter Stock.
The Magpul Bolt Action Magazine Well is a drop-in solution for our Remington 700 Hunter Stock for those that are wishing to add detachable box magazine capabilities to their rifle. By simply removing your OEM bottom metal and the insert on the Hunter 700 Stock, users can add this reinforced polymer trigger guard and magazine well to their rifle without the need for custom inletting from gunsmiths. Designed to work with AICS pattern, short action magazines. This kit also includes the Magpul PMAG 5 AC.
The Magpul Bolt Action Magazine Well is a drop-in solution for the Magpul Remington 700 Hunter Stock for those that are wishing to add detachable box magazine capabilities to their rifle. By simply removing your OEM bottom metal and the insert on the Hunter 700 Stock, users can add this reinforced polymer trigger guard and magazine well to their rifle without the need for custom inletting from gunsmiths. Designed to work with AICS pattern, short action magazines. This kit also includes the Magpul PMAG 5 AC. PLEASE NOTE: This will only fit the Magpul Remington 700 Hunter Stock.
Top takeaways
The Magpul Bolt Action Magazine Well is a drop-in upgrade for the Magpul Remington 700 Hunter Stock that allows for the use of detachable box magazines.
No custom inletting from gunsmiths is required as it is designed to replace the OEM bottom metal and insert on the Hunter 700 Stock with a reinforced polymer trigger guard and magazine well.
Compatible with AICS pattern, short action magazines and includes a Magpul PMAG 5 AC.
Attributes
Finish:Black
Model:700
Weapon type:Remington
Delivery weight:0.259kg
Shipping height:51mm
Shipping width:140mm
Shipping length:203mm
UPC:840815100768
Item details
Made in USA
US export classification: 0A501.x
Customers reviews
Customer ratings (12)
4 / 5
Definitely recommended
Great for the money 04/01/2018
This product is great, not perfect, but great. Feeding is reliable and loading is fast. Install is supper easy and fast, mags are decent quality. Its a $70 remington 700 mag conversion that works. The quality is not up to accuracy international or Wyatts standers but its not $250 either.
Definitely recommended
Another Excellent Magpul Product 13/11/2016
I finally have the ability to use a box magazine with my Rem 700. I had my eye on the Pro Hunter stock since it came out but was sold when I came across this at my local gun store; I picked up the stock and bottom 'metal'. Easy swap out and works great. Too bad the magazines are AICS and not just the standard 308 PMAG. At least it comes with a 5 round magazine.
Recommended with reservations
It works, but in not drop-in 15/10/2016
Basically , this stock is a great design with two minor flaws. Number one is that this trigger guard rattles around inside the stock. It really requires a little bit of superglue or some sort of adhesive to bond it onto the stock and take out the slack. The second is that the trigger guard has to be inletted on the inside back side to allow the trigger too pull to the rear. It took me about an hour of unnecessary fooling with it in order to get it working right. A slight redesign seems in order. I tried it with a Jard trigger, a Timney trigger and the factory X-mark trigger and they all hit on the back of the trigger guard and would not function without modification.
Definitely recommended
Great product 06/08/2016
Drop in fit for my 700. Excellent value over the $500 aluminum options. Makes reloads faster with my scope setup. Should have put this in a while ago for the price. Highly recommended.
Recommended
Economical mag conversion for drop plate 29/03/2016
I have the same complaint as others about the trigger guard contacting the trigger. I plan on sanding it down for some extra clearance. So far the trigger breaks, but it does make contact with the guard. A rounded profile would have been a better option in this case. The stock and mag well make a nice upgrade for the original drop plate setup and how much of a PITA that is to load.
Definitely recommended
Guess I got a good one 26/03/2016
After reading the other reviews on this product, I guess that I lucked out. Mine fits perfectly, and functions flawlessly. I can't ask for anything more. Especially for a little over 60 bucks. I had it installed in under a minute because it came in with my stock. Everything lined up right, and it cycles rounds great. I can't say that my mag release is hard. I honestly wouldn't want it any easier for fear that it would be bumped easily. I had no clearance issues with my trigger either. I have the x-mark pro in there still, but have seen many reviews that the Timney 510 will fit in there with no problem. As long as there is a curve, it should fit. Once again, maybe I got lucky, but I doubt it. I seem to be cursed in all things gun related, and mine works great.
Definitely recommended
Vast improvement 12/02/2016
I installed this with the Magpul Hunter 700 stock on a Remington 700 AAC-SD to replace the factory stock and an aftermarket magazine conversion kit that I had bought sometime back. I ordered two new bolts (stainless steel) for the installation and it took less than 10 minutes to swap out the old stock with the new one and the magazine conversion. The magazines fit snug and held firmly in place. There is no magazine rock so they rounds feed smoothly and do not jamb.
Not recommended
Back of trigger guard touches trigger 11/02/2016
When the mag well was installed on the bench, the trigger was close to the trigger guard and had just a few thousandths of clearance. After two rounds fired at the range, the rifle seated into the Magpul Hunter stock and the trigger was bound on the trigger guard. Could not get a third round to fire. Must either modify the trigger guard by filing the back (slanted portion) or replace the Remington trigger with a strait trigger or file off the bottom 1/4 inch of the trigger. The defect in design appears to be the rear of the trigger guard has a 45 degree slant to it when it should have more of a radius to allow for the trigger pull.
Not recommended
Mag well too tight for AI mags. 02/01/2016
The mag well does not accept AI magazines or aftermarket AI style magazines. This seems to function with the Magpul 308 mag that was supplied, however, I was looking to adapt this to a 223 mag. Also the trigger guard is too small to accept anything other than the factory trigger. The mag release is clumsy and requires an enormous amount of pressure to release. I am sending this back with the Magpul hunter stock. I will wait for the second generation from Magpul with hopes that they rectify their design shortcomings.
Definitely recommended
Works Great 01/12/2015
Everything dropped into place. The rounds feed smooth as glass. I have the Remington factory trigger so there was no trigger issues. Shoots good, love it.
Recommended
Mostly good 25/11/2015
Pros: Looks great. Comes with the magazine.
Con: The mag release tension is out of this world. A lot more than it should be. Also, it doesn't fit the flat triggers.
Definitely recommended
Good stuff 16/11/2015
I really like the stock and mag well. My main uses are hunting and target shooting. Solid, quality feel one would expect from magpul. My only complaint is the trigger guard on this mag well does NOT quite clear my Timney straight trigger. Nothing a few minutes with the dremmel couldn't fix, but worth noting.
Upgrade your Remington 700 with the HUNTER 700 Short Action Magazine Well! 🛠️ Enjoy easy installation and enhanced magazine capabilities.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
The Magpul Remington 700 Hunter Stock is a drop-in solution with reinforced polymer and an anodized aluminum bedding block, enhancing ergonomics for the Remington 700 Short Actions.
It offers adjustable length of pull and comb height with separate purchase of the Magpul SGA Recoil Pad Adapter and Cheek Riser Kit, and is M-LOK compatible for accessory attachment.
The stock allows for use with detachable box magazines through the separately available Bolt Action Magazine Well, without the need for custom inletting.
The Magpul M-LOK Bipod Mount is designed for Harris-style bipods and offers a low-profile, robust mounting solution.
It uses the M-LOK system for a closer, more stable connection to the mounting surface and is compatible with other sling stud accessories.
Constructed from mil-spec anodized aluminum, it includes all necessary hardware for attachment and is made in the U.S.A.
The PMAG 10 7.62 AC is a 10-round polymer magazine for .308 Winchester cartridges, suitable for competition or combat.
It's built with advanced M3 technology, enhancing its durability and reliability for bolt action firearms.
Designed for Remington and Short Action models like the 700 and AICS, it features a black finish and is manufactured by MAGPUL.
The Sinclair Chamber Length Gauge allows handloaders to measure the true chamber length from the bolt face to the chamber's neck end, revealing potential excess case length over published trim lengths.
Made of 12L14 soft steel, the gauge is designed to avoid damaging the chamber and comes with step-by-step instructions, suitable for repeated use.
Compatibility restrictions include the 22 caliber gauge not working on thin-necked cases like the 22 Hornet and 218 Bee, and the 30 caliber gauge not fitting the 30-30 Winchester.
Reinforced polymer construction enhances strength and durability, with ergonomic design features like an optimized grip angle and forend shape.
Adjustable length of pull with included spacers and optional cheek risers for comb height customization, alongside a drop-in design that eliminates the need for gunsmithing.
Compatible with all factory lightweight and match bull barrels, offers multiple sling mounting options, and is M-LOK compatible for additional accessory attachments.
Help and contact
Newsletter
Classical view
Mobile view