Classic Model 70-style safety and bolt shroud for the equally classic Mauser action. Combines the gas deflecting design of the original Mauser bolt shroud with the three-position, side-swing safety of the Model 70 for better scope clearance. Supplied in-the-white. Gunsmith installation required.
SPECS: Polished steel, in-the-white. Weighs 2 ½ oz. (56.7g).
More...
Customer ratings for DAKOTA ARMS MODEL 70-STYLE SHROUD
Number of ratings: 3
From brownells.com: 3
Average rating: 5
top notch(11/04/2012)
follow the instructions and all will be well, i made a cut on both sides of the firing pin so i dont have to worry about having the right end towards the saftey, you most likely will have to trim down your firing pin sear. otherwise top shelf as usual from dakota
Dakota Shroud(16/04/2012)
I bought this not ever installing one these before, but always liking the swing safety. I read the instructions several time so not to miss anything, also looking on other forums to see if there was problems installing this. I found nothing. I preped my bolt by removing the bluing that was there and painting the back with Dyekem blue for marking. I measured several times so not get get the spot to mill wrong, so marking the mill spot with the dremel and chucked up the bolt for milling the .125 cut. In less than a minute I was finished and ready to assemble... several times for the final fit. It works great, easier to install than you think, but do the prep work and take your time. This is not a 5 minute job, but the payoff is in the details.
Great upgrade for a Mauser(11/08/2013)
Shroud was polished and ready to blue. Take your time read the instructions completely then read Episode 4 - An end to the windshield wiper safety from the Brownells web bench series. Installation was a breeze. It is a great upgrade for a custom Mauser project.
Product no.: 359141070 DAKOTA ARMS MODEL 70-STYLE SHROUD Mfr Part: EMUNNN001 Classic Model 70-style safety and bolt shroud for the equally classic Mauser action. Combines the gas deflecting design of the original Mauser bolt shroud with the three-position, side-swing safety of the Model 70 for better scope clearance. Supplied in-the-white. Gunsmith installation required.
Made in USA
US export classification: 0A501.x
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Upgrade your Mauser 98 with the classic M70-style bolt shroud & safety. 🔧 Perfect for enhanced scope clearance and performance!
Classic Model 70-style safety and bolt shroud for the equally classic Mauser action. Combines the gas deflecting design of the original Mauser bolt shroud with the three-position, side-swing safety of the Model 70 for better scope clearance. Supplied in-the-white. Gunsmith installation required.
SPECS: Polished steel, in-the-white. Weighs 2 ½ oz. (56.7g).
More...
Customer ratings for DAKOTA ARMS MODEL 70-STYLE SHROUD
Number of ratings: 3
From brownells.com: 3
Average rating: 5
top notch(11/04/2012)
follow the instructions and all will be well, i made a cut on both sides of the firing pin so i dont have to worry about having the right end towards the saftey, you most likely will have to trim down your firing pin sear. otherwise top shelf as usual from dakota
Dakota Shroud(16/04/2012)
I bought this not ever installing one these before, but always liking the swing safety. I read the instructions several time so not to miss anything, also looking on other forums to see if there was problems installing this. I found nothing. I preped my bolt by removing the bluing that was there and painting the back with Dyekem blue for marking. I measured several times so not get get the spot to mill wrong, so marking the mill spot with the dremel and chucked up the bolt for milling the .125 cut. In less than a minute I was finished and ready to assemble... several times for the final fit. It works great, easier to install than you think, but do the prep work and take your time. This is not a 5 minute job, but the payoff is in the details.
Great upgrade for a Mauser(11/08/2013)
Shroud was polished and ready to blue. Take your time read the instructions completely then read Episode 4 - An end to the windshield wiper safety from the Brownells web bench series. Installation was a breeze. It is a great upgrade for a custom Mauser project.