Cut Accurate Chambers For Rimmed, Rimless, & Rimfire Handgun Cartridges
Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.
Note: If you do not see the caliber you are looking for below, please feel free to contact our Special Orders Department, as many additional items are avaliable from Clymer.
SPECS: PISTOL REAMERS - 6, right-hand cutting, straight flutes. Solid pilot. Integral throat. Available in two different pilot diameters: Barrel for Single Shot or Semi-Auto pistol and rifle barrels; Cylinder for Revolver cylinders. 7/16" dia. shank with 3/8 " square drive, depending on caliber, ¼" round shank on .22 RF. Stocked in Finisher style only. ORDERING: Advise: 1) Stock #. 2) Cartridge Caliber and Name.
More...
Customer ratings for CLYMER RIMLESS FINISHER STYLE REAMER FITS 10MM AUTO BARREL
Number of ratings: 2
From brownells.com: 2
Average rating: 5
Very nice reamer(01/11/2009)
Not much you can say about a reamer. It's very clean,very sharp and over all nice grinding.
Great for reworking tight chambers.(04/08/2015)
I used this to correct a 40 S&W barrel that had an undersized chamber and rough throat. The finish produced is outstanding. Can be used by hand with a tap wrench and good cutting oil like Do-Drill. Just cut a few turns, back out while still spinning, wipe or blow off chips, re-oil and go again. Use extreme care when you are getting close to shoulder area so you just clean up the shoulder. If you have depth mikes, check the headspace depth so as not to exceed SAAMI specs which can be printed off the SAAMI website for free.
Product no.: 184051410 CLYMER RIMLESS FINISHER STYLE REAMER FITS 10MM AUTO BARREL Mfr Part: F10MMAUTOB Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.
Clymer's Pistol Chambering Reamers are made from high-quality M-7 High-Speed Steel for professional gunsmithing and are guaranteed to last a lifetime with proper care.
Designed to SAAMI specifications, these reamers come in a Rimless Finisher style for 10mm Auto cartridges, with options for different pilot diameters for various barrel types.
Finish Reamers can be used alone for a few chambers, while Roughers are recommended for saving wear on the Finish Reamer when cutting many chambers.
Attributes
Cartridge:
10 mm Auto
Style:
Rimless Pistol
Delivery weight: 0.068kgShipping height: 15mmShipping width: 18mmShipping length: 130mm
Product no.: 184051380 CLYMER RIMMED FINISHER STYLE REAMER FITS .38 S&W SPECIAL CYLINDER Mfr Part: F38SPECC Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.
149.9GBP18£149.90
*
Delivery time approx. 7-14 days. More than 10 pieces in USA warehouse
Product no.: 184051441 CLYMER RIMMED FINISHER STYLE REAMER FITS .44 MAGNUM BARREL Mfr Part: F44MGNB Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.
154.9GBP12£154.90
*
Delivery time approx. 7-14 days. More than 10 pieces in USA warehouse
Clymer's Pistol Chambering Reamers are made from M-7 High-Speed Steel for professional gunsmithing and are guaranteed to last.
Finisher Reamers are sufficient for occasional chamber cutting, while Roughers are recommended for frequent use to extend the Finisher's life.
Reamers are crafted to SAAMI specifications, with options for different pistol and rifle barrel diameters, including a specific style for revolver cylinders.
Product no.: 184051443 CLYMER RIMMED FINISHER STYLE REAMER FITS .44/40 BARREL Mfr Part: F44/40B Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.
194.9GBP10£194.90
*
Delivery time approx. 7-14 days. More than 10 pieces in USA warehouse
Clymer's Pistol Chambering Reamers are made from high-quality M-7 High-Speed Steel for professional gunsmithing and have a long service life.
These reamers are precision tools designed to SAAMI specifications and come in Rimmed Finisher Style specifically for .44/40 Winchester cartridges.
The product is available in Finisher style with options for different pilot diameters to cater to both Single Shot/Semi-Auto barrels and Revolver cylinders.
Product no.: 184051451 CLYMER RIMLESS FINISHER STYLE REAMER FITS .45 ACP BARREL Mfr Part: F45ACPB Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.
139.9GBP11£139.90
*
Delivery time approx. 7-14 days. More than 10 pieces in USA warehouse
Specs:Cartridge: 45 Auto (ACP)Style: Rimless Pistol
Clymer's Pistol Chambering Reamers are made from high-quality M-7 High-Speed Steel for professional gunsmithing, ensuring longevity and precision.
The reamers are designed to SAAMI specifications with options for Rimless Pistol style, specifically fitting .45 ACP barrels.
Available in Finisher style with a solid pilot and integral throat, these reamers come in two pilot diameters suitable for single-shot or semi-auto barrels and revolver cylinders.
Product no.: 184051456 CLYMER RIMMED FINISHER STYLE REAMER FITS .45 LONG COLT BARREL Mfr Part: F45LCB Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.
154.9GBP41£154.90
*
Delivery time approx. 7-14 days. More than 10 pieces in USA warehouse
Cut Accurate Chambers For Rimmed, Rimless, & Rimfire Handgun Cartridges
Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.
Note: If you do not see the caliber you are looking for below, please feel free to contact our Special Orders Department, as many additional items are avaliable from Clymer.
SPECS: PISTOL REAMERS - 6, right-hand cutting, straight flutes. Solid pilot. Integral throat. Available in two different pilot diameters: Barrel for Single Shot or Semi-Auto pistol and rifle barrels; Cylinder for Revolver cylinders. 7/16" dia. shank with 3/8 " square drive, depending on caliber, ¼" round shank on .22 RF. Stocked in Finisher style only. ORDERING: Advise: 1) Stock #. 2) Cartridge Caliber and Name.
More...
Customer ratings for CLYMER RIMLESS FINISHER STYLE REAMER FITS 10MM AUTO BARREL
Number of ratings: 2
From brownells.com: 2
Average rating: 5
Very nice reamer(01/11/2009)
Not much you can say about a reamer. It's very clean,very sharp and over all nice grinding.
Great for reworking tight chambers.(04/08/2015)
I used this to correct a 40 S&W barrel that had an undersized chamber and rough throat. The finish produced is outstanding. Can be used by hand with a tap wrench and good cutting oil like Do-Drill. Just cut a few turns, back out while still spinning, wipe or blow off chips, re-oil and go again. Use extreme care when you are getting close to shoulder area so you just clean up the shoulder. If you have depth mikes, check the headspace depth so as not to exceed SAAMI specs which can be printed off the SAAMI website for free.