Replaces Factory Sear For A Light, Clean-Breaking Trigger Pull
This specially designed sear provides the shooter with a shorter, faster, cleaner breaking trigger pull. The sear is wire EDM-cut from hardened A2 tool steel. Fits Ruger® MKII™, MKIII™ and 22/45™.
Ruger Mark II/III Target Sear
Attributes
Model:Mark I,Mark II
Weapon type:Ruger
Delivery weight:0.009kg
Shipping height:10mm
Shipping width:71mm
Shipping length:86mm
UPC:810162011680
Item details
Made in USA
US export classification: 0A501.c
Customers reviews
Customer ratings (12)
4.1 / 5
Definitely recommended
Should be the first upgrade you do! 16/02/2017
Loved my new mkiii 22/45, everything but the trigger that is. After reading some reviews I ordered the volquartsen target sear. Install wasn't too bad after a few YouTube videos. The results are amazing! The trigger breaks so much cleaner and twice as easy as before just like it should.
Definitely recommended
What a game changer on my Mark II 02/01/2017
I installed this sear on a 24 year old SS slab sided Ruger Mark II along with a Vq trigger installed 24 years ago it's a game changer , the trigger breaks clean with no creep . I installed a pre set , set screw in the trigger guard when I added the trigger 24 years ago . This pistol has a trigger pull weight of 1 1/4 to 1 1/2 lbs . The triggers are the old style SS kind . Should have done the complete pistol years ago .
If your into shooting USPSA steel plates add the sear, trigger and you'll be set .
DoubleTap
Definitely recommended
Great Addition to those needing a Sear 03/09/2016
I replaced the factory Sear in my MkIII TARGET along with other modifications. The Factory trigger had a lot of take up and over travel as well as creep and a heavy, gritty break. So when I installed a new flat Faced Trigger, I decided to do the sear as well. No Fitting is required in a Mk II or Mk III, and it will not fit a Mk I. BTW, This sear would have a higher rating if the three reviews that talk about attempting to install in a MKI were dropped. I cannot imagine that installing this sear, by itself, would not make a major difference. I Installed with other modifications, the results are spectacular. I know that now, My MkIII trigger has no perceptible creep and breaks like a glass rod. So this was a major improvement over the stock sear. Very Pleased.
Recommended with reservations
Good, but not great 12/08/2014
My Ruger Mark III 22/45 is well-tuned, well-cared for, and has many thousands of rounds through it. The factory sear and hammer provided a crisp, repetitive three-pound release. While I have been quite satisfied with it, I installed the Volquartsen sear to see if it measured up to the claims I've read in reviews.
The VQ sear dropped the release to a fairly repetitive 1.6 pounds, but it feels a little mushy. I'll pass final judgement after a thousand rounds or so. But, at this point I'm not going to bother installing a VQ sear in my Mark III Target, which also has a crisp three-pound release. I'm perfectly happy with it.
Definitely recommended
Very Nice!!!! 09/05/2014
I installed this sear and also the company's SS target trigger. My original trigger pull was a heavy and grainy 4&1/4Lbs. This Sear and trigger combo brought it down to a very nice crisp and clean 1&3/4Lbs.I highly recommend it! FYI YouTube has videos that keep you outta trouble when disassembling and installing these parts.
Definitely recommended
Work on Ruger Standard Pistol 30/04/2014
Installed this sear and the Volquartsen stainless trigger easily on my Ruger Standard Pistol(pre Mark I)without any modifications. What a difference it made. Cut the trigger pull in half and no more creep. Very smooth and crisp trigger now. Best investment for this pistol.
Definitely recommended
Oh man.... 25/10/2013
This sear totally cuts the trigger pull in half! I love it. Makes the gun even more fun to shoot. I also added a Tandemkross hammer bushing and between the two, I have the most consistent trigger pull ever. I highly recommend the Volquartsen sear for any MKIII or 22/45 owner.
Definitely recommended
Sweet! 02/05/2013
I installed this sear in a MKIII target model. The difference in trigger pull is amazing. The release is very crisp. Installation for this and the Volquortsen trigger took about 45 minutes including a fair amount of associated cleaning, but I am familiar with the workings of these pistols. This sear is the single biggest improvement you can make to a MKII or MKIII Ruger.
Not recommended
Volquartsen sear for Mark II 23/05/2011
This sear is slightly taller than the original and would not allow the gun to be cocked.
Definitely recommended
It will work on MK I Rugers 25/03/2010
On most MKI's the [...] will work but on others fitting is required with the safety which is why we do not sell this part as a drop in item for the MKI.
Recommended
super item - not for Mark I 10/03/2010
Installs as directions indicate. Works great. Much better trigger pull. Have a Mark III DOES NOT WORK IN MK I
Not recommended
Did not fit in my MK I 17/11/2009
Not sure why Brownells says that this works with the Mk I. It doesn't. Even Volquartsen's website says Mark II or III only....
Upgrade your Ruger® Mark II™/III™ with the Volquartsen Target Sear for enhanced performance and precision. 🎯 Experience the difference!
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
The KANEWOLF Slingshot Upgrade allows Ruger 22/45 owners to perform "sling shot" action for loading the first round.
Installation is quick and does not affect other functions of the pistol, including the last round hold open.
Designed specifically for Ruger polymer frame Mark III 22/45 model pistols.
Precision machined for a consistent pull and improved accuracy, with adjustable stop screw for overtravel and pretravel.
Ultra-smooth trigger shoe offers more contact with the finger, available in Black anodized aluminum or polished stainless steel (SS).
Designed for Ruger Mark I, Mark II, Mark III, and 22/45 pistols, the trigger includes a spring and plunger.
Hogue 22/45 grips feature a wraparound style with finger grooves for improved control.
These grips are made of rubber with a textured surface for a secure hold and are only compatible with Ruger 22/45 RP models.
The grips do not fit MK IV models and are specifically designed for MK III models with removable panels.
The TANDEMKROSS Magazine Disconnect Bushing is made of high quality 304 stainless steel and is designed to replace the factory Ruger bushing for MKIII™ and 22/45™ pistols.
Removal of the magazine disconnect allows magazines to drop freely, enables firing without a magazine, and simplifies the takedown and cleaning process.
Installation of the bushing does not affect the trigger's function or feel.
The HIVIZ LITEWAVE front sight features an innovative diagonal-wave design for increased durability and light gathering from all angles.
Compatible with the Ruger® 22/45™ Lite model with adjustable rear sight and includes interchangeable LitePipes in red, green, and white.
Designed as a fiber optic sight, it enhances visibility with a .395" height and .125" width without an outline.