Machined From: Solid 7075 T6 Aircraft Grade Aluminum Finish: Matte Black Only Compatible with Picatinny or Weaver scope rings. Mounting Hardware: #8-40 X 1/4 Screws and T-10 Wrench Included Torque Specs: 20 in/lbs This mount is made specifically for the Ruger Precision Rifle (RPR). The end of the rail with the number engraved is the front of the rail. This mount will not work on: Ruger Precision Rimfire Ruger Precision Magnum Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002". After machining; the mounts are tumbled and sand blasted. The aluminum mounts are Type III hard coat anodized for long lasting durability. The steel rails are Mil Spec parkerized for a durable rust resistant finish. We recommend: 0 MOA - if shooting 0-500 yards 30 MOA - if shooting 1000-1500 yards 40 MOA - if shooting 1500+ yards When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards. Compatible with Picatinny or Weaver scope rings. Add EGW’s HD Scope Rings to make it a complete package! From manufacturing to packaging, EGW’s products are made with pride in the USA. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).
More...
94.994.93GBP
Product no.: 296000600 EGW RUGER PRECISION RIFLE HD SCOPE BASE 30 MOA Mfr Part: 80433841370116379 Machined From: Solid 7075 T6 Aircraft Grade Aluminum Finish: Matte Black Only Compatible with Picatinny or Weaver scope rings. Mounting Hardware: #8-40 X 1/4 Screws and T-10 Wrench Included Torque Specs: 20 in/lbs This mount is made specifically for the Ruger Precision Rifle (RPR). The end of the rail with the number engraved is the front of the rail. This mount will not work on: Ruger Precision Rimfire Ruger Precision Magnum Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002". After machining; the mounts are tumbled and sand blasted. The aluminum mounts are Type III hard coat anodized for long lasting durability. The steel rails are Mil Spec parkerized for a durable rust resistant finish. We recommend: 0 MOA - if shooting 0-500 yards 30 MOA - if shooting 1000-1500 yards 40 MOA - if shooting 1500+ yards When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards. Compatible with Picatinny or Weaver scope rings. Add EGW’s HD Scope Rings to make it a complete package! From manufacturing to packaging, EGW’s products are made with pride in the USA. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).
The EGW Ruger Precision Rifle HD Scope Base is a 1-piece rail, machined from 7075 T6 aircraft grade aluminum, with a matte black finish, designed specifically for the Ruger Precision Rifle, not compatible with the Rimfire or Magnum models.
This scope base features a 30 MOA elevation, full-length Picatinny cross slots to MIL-STD 1913 specs, and comes with #8-40 X 1/4 screws, a T-10 wrench, and recommends 20 in/lbs of torque for installation.
It is made in the USA, compatible with both Picatinny or Weaver scope rings, and EGW suggests adding their HD Scope Rings for a complete setup.
Product no.: 296000601 EGW RUGER PRECISION RIFLE HD SCOPE BASE 40 MOA Mfr Part: 80434841370116362 Machined From: Solid 7075 T6 Aircraft Grade Aluminum Finish: Matte Black Only Compatible with Picatinny or Weaver scope rings. Mounting Hardware: #8-40 X 1/4 Screws and T-10 Wrench Included Torque Specs: 20 in/lbs This mount is made specifically for the Ruger Precision Rifle (RPR). The end of the rail with the number engraved is the front of the rail. This mount will not work on: Ruger Precision Rimfire Ruger Precision Magnum Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002". After machining; the mounts are tumbled and sand blasted. The aluminum mounts are Type III hard coat anodized for long lasting durability. The steel rails are Mil Spec parkerized for a durable rust resistant finish. We recommend: 0 MOA - if shooting 0-500 yards 30 MOA - if shooting 1000-1500 yards 40 MOA - if shooting 1500+ yards When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards. Compatible with Picatinny or Weaver scope rings. Add EGW’s HD Scope Rings to make it a complete package! From manufacturing to packaging, EGW’s products are made with pride in the USA. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).
Product no.: 296000599 EGW RUGER PRECISION RIFLE HD SCOPE BASE 0 MOA Mfr Part: 80430841370117253 Machined From: Solid 7075 T6 Aircraft Grade Aluminum Finish: Matte Black Only Compatible with Picatinny or Weaver scope rings. Mounting Hardware: #8-40 X 1/4 Screws and T-10 Wrench Included Torque Specs: 20 in/lbs This mount is made specifically for the Ruger Precision Rifle (RPR). The end of the rail with the number engraved is the front of the rail. This mount will not work on: Ruger Precision Rimfire Ruger Precision Magnum Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002". After machining; the mounts are tumbled and sand blasted. The aluminum mounts are Type III hard coat anodized for long lasting durability. The steel rails are Mil Spec parkerized for a durable rust resistant finish. We recommend: 0 MOA - if shooting 0-500 yards 30 MOA - if shooting 1000-1500 yards 40 MOA - if shooting 1500+ yards When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards. Compatible with Picatinny or Weaver scope rings. Add EGW’s HD Scope Rings to make it a complete package! From manufacturing to packaging, EGW’s products are made with pride in the USA. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).
Machined From: Solid 7075 T6 Aircraft Grade Aluminum Finish: Matte Black Only Compatible with Picatinny or Weaver scope rings. Mounting Hardware: #8-40 X 1/4 Screws and T-10 Wrench Included Torque Specs: 20 in/lbs This mount is made specifically for the Ruger Precision Rifle (RPR). The end of the rail with the number engraved is the front of the rail. This mount will not work on: Ruger Precision Rimfire Ruger Precision Magnum Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002". After machining; the mounts are tumbled and sand blasted. The aluminum mounts are Type III hard coat anodized for long lasting durability. The steel rails are Mil Spec parkerized for a durable rust resistant finish. We recommend: 0 MOA - if shooting 0-500 yards 30 MOA - if shooting 1000-1500 yards 40 MOA - if shooting 1500+ yards When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards. Compatible with Picatinny or Weaver scope rings. Add EGW’s HD Scope Rings to make it a complete package! From manufacturing to packaging, EGW’s products are made with pride in the USA. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).