Help and contact
(0) Basket
Newsletter
Home
Optics & Mounting
Rings, Mounts & Bases
Rifle Bases
EGW RUGER PRECISION RIFLE HD SCOPE BASES
Support
EGW
RUGER PRECISION RIFLE HD SCOPE BASES
94.9
94.9
3
GBP
Product no.: 296000601
EGW RUGER PRECISION RIFLE HD SCOPE BASE 40 MOA
Mfr Part: 80434 841370116362 Machined From: Solid 7075 T6 Aircraft Grade Aluminum Finish: Matte Black Only Compatible with Picatinny or Weaver scope rings. Mounting Hardware: #8-40 X 1/4 Screws and T-10 Wrench Included Torque Specs: 20 in/lbs This mount is made specifically for the Ruger Precision Rifle (RPR). The end of the rail with the number engraved is the front of the rail. This mount will not work on: Ruger Precision Rimfire Ruger Precision Magnum Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002". After machining; the mounts are tumbled and sand blasted. The aluminum mounts are Type III hard coat anodized for long lasting durability. The steel rails are Mil Spec parkerized for a durable rust resistant finish. We recommend: 0 MOA - if shooting 0-500 yards 30 MOA - if shooting 1000-1500 yards 40 MOA - if shooting 1500+ yards When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards. Compatible with Picatinny or Weaver scope rings. Add EGW’s HD Scope Rings to make it a complete package! From manufacturing to packaging, EGW’s products are made with pride in the USA. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).
EGW RUGER PRECISION RIFLE HD SCOPE BASE 40 MOA
Mfr Part: 80434 841370116362 Machined From: Solid 7075 T6 Aircraft Grade Aluminum Finish: Matte Black Only Compatible with Picatinny or Weaver scope rings. Mounting Hardware: #8-40 X 1/4 Screws and T-10 Wrench Included Torque Specs: 20 in/lbs This mount is made specifically for the Ruger Precision Rifle (RPR). The end of the rail with the number engraved is the front of the rail. This mount will not work on: Ruger Precision Rimfire Ruger Precision Magnum Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002". After machining; the mounts are tumbled and sand blasted. The aluminum mounts are Type III hard coat anodized for long lasting durability. The steel rails are Mil Spec parkerized for a durable rust resistant finish. We recommend: 0 MOA - if shooting 0-500 yards 30 MOA - if shooting 1000-1500 yards 40 MOA - if shooting 1500+ yards When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards. Compatible with Picatinny or Weaver scope rings. Add EGW’s HD Scope Rings to make it a complete package! From manufacturing to packaging, EGW’s products are made with pride in the USA. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).
Specs:
Color: Matte Black
Elevation: 40 MOA
Make: Ruger
Material: Aluminum
Model: Precision Rifle
Number of Bases: 1-Piece
Style: Picatinny Rail
Product no.: 296000599
EGW RUGER PRECISION RIFLE HD SCOPE BASE 0 MOA
Mfr Part: 80430 841370117253 Machined From: Solid 7075 T6 Aircraft Grade Aluminum Finish: Matte Black Only Compatible with Picatinny or Weaver scope rings. Mounting Hardware: #8-40 X 1/4 Screws and T-10 Wrench Included Torque Specs: 20 in/lbs This mount is made specifically for the Ruger Precision Rifle (RPR). The end of the rail with the number engraved is the front of the rail. This mount will not work on: Ruger Precision Rimfire Ruger Precision Magnum Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002". After machining; the mounts are tumbled and sand blasted. The aluminum mounts are Type III hard coat anodized for long lasting durability. The steel rails are Mil Spec parkerized for a durable rust resistant finish. We recommend: 0 MOA - if shooting 0-500 yards 30 MOA - if shooting 1000-1500 yards 40 MOA - if shooting 1500+ yards When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards. Compatible with Picatinny or Weaver scope rings. Add EGW’s HD Scope Rings to make it a complete package! From manufacturing to packaging, EGW’s products are made with pride in the USA. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).
EGW RUGER PRECISION RIFLE HD SCOPE BASE 0 MOA
Mfr Part: 80430 841370117253 Machined From: Solid 7075 T6 Aircraft Grade Aluminum Finish: Matte Black Only Compatible with Picatinny or Weaver scope rings. Mounting Hardware: #8-40 X 1/4 Screws and T-10 Wrench Included Torque Specs: 20 in/lbs This mount is made specifically for the Ruger Precision Rifle (RPR). The end of the rail with the number engraved is the front of the rail. This mount will not work on: Ruger Precision Rimfire Ruger Precision Magnum Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002". After machining; the mounts are tumbled and sand blasted. The aluminum mounts are Type III hard coat anodized for long lasting durability. The steel rails are Mil Spec parkerized for a durable rust resistant finish. We recommend: 0 MOA - if shooting 0-500 yards 30 MOA - if shooting 1000-1500 yards 40 MOA - if shooting 1500+ yards When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards. Compatible with Picatinny or Weaver scope rings. Add EGW’s HD Scope Rings to make it a complete package! From manufacturing to packaging, EGW’s products are made with pride in the USA. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).
Specs:
Color: Matte Black
Elevation: 0 MOA
Make: Ruger
Material: Aluminum
Model: Precision Rifle
Number of Bases: 1-Piece
Style: Picatinny Rail
Product no.: 296000600
EGW RUGER PRECISION RIFLE HD SCOPE BASE 30 MOA
Mfr Part: 80433 841370116379 Machined From: Solid 7075 T6 Aircraft Grade Aluminum Finish: Matte Black Only Compatible with Picatinny or Weaver scope rings. Mounting Hardware: #8-40 X 1/4 Screws and T-10 Wrench Included Torque Specs: 20 in/lbs This mount is made specifically for the Ruger Precision Rifle (RPR). The end of the rail with the number engraved is the front of the rail. This mount will not work on: Ruger Precision Rimfire Ruger Precision Magnum Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002". After machining; the mounts are tumbled and sand blasted. The aluminum mounts are Type III hard coat anodized for long lasting durability. The steel rails are Mil Spec parkerized for a durable rust resistant finish. We recommend: 0 MOA - if shooting 0-500 yards 30 MOA - if shooting 1000-1500 yards 40 MOA - if shooting 1500+ yards When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards. Compatible with Picatinny or Weaver scope rings. Add EGW’s HD Scope Rings to make it a complete package! From manufacturing to packaging, EGW’s products are made with pride in the USA. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).
EGW RUGER PRECISION RIFLE HD SCOPE BASE 30 MOA
Mfr Part: 80433 841370116379 Machined From: Solid 7075 T6 Aircraft Grade Aluminum Finish: Matte Black Only Compatible with Picatinny or Weaver scope rings. Mounting Hardware: #8-40 X 1/4 Screws and T-10 Wrench Included Torque Specs: 20 in/lbs This mount is made specifically for the Ruger Precision Rifle (RPR). The end of the rail with the number engraved is the front of the rail. This mount will not work on: Ruger Precision Rimfire Ruger Precision Magnum Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002". After machining; the mounts are tumbled and sand blasted. The aluminum mounts are Type III hard coat anodized for long lasting durability. The steel rails are Mil Spec parkerized for a durable rust resistant finish. We recommend: 0 MOA - if shooting 0-500 yards 30 MOA - if shooting 1000-1500 yards 40 MOA - if shooting 1500+ yards When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards. Compatible with Picatinny or Weaver scope rings. Add EGW’s HD Scope Rings to make it a complete package! From manufacturing to packaging, EGW’s products are made with pride in the USA. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).
Specs:
Color: Matte Black
Elevation: 30 MOA
Make: Ruger
Material: Aluminum
Model: Precision Rifle
Number of Bases: 1-Piece
Style: Picatinny Rail
Upgrade your Ruger Precision Rifle with the EGW HD Scope Base! 🏹 Durable aluminum, 40 MOA elevation, and compatible with Picatinny rings.
Classical view
Mobile view