Help and contact
(0) Basket
Newsletter
Home
Reloading
Case Preparation
Neck Turning
Turning & Expander Mandrels
SINCLAIR INTERNATIONAL STAINLESS STEEL EXPANDER MANDRELS
Support
SINCLAIR INTERNATIONAL
STAINLESS STEEL EXPANDER MANDRELS
16.9
18.9
11
GBP
Product no.: 749001165
SINCLAIR INTERNATIONAL 270 CALIBER (.276") STAINLESS EXPANDER MANDREL
Mfr Part: E27 Our neck turning tool mandrels are made from high grade stainless steel on Precision turning centers. The shape, finish, and size are the result of years of use and experimentation by many hand loaders. All of our mandrels fit both our NT-3000 and NT-1000 neck turning tools and most of our older model neck turning tools. Our neck turning tool mandrels measure approximately about .002"" less than the bullet diameter for the caliber. Our expander mandrels are made .001"" larger than the turning mandrels. Using an expander mandrel prior to neck turning sizes the case to fit the neck turning mandrels perfectly. This correct fit makes the turning process more precise and much easier. Any of the mandrels can be used to ""neck"" cases up to the next caliber when used with the NT-EXP (Expander Body).
SINCLAIR INTERNATIONAL 270 CALIBER (.276") STAINLESS EXPANDER MANDREL
Mfr Part: E27 Our neck turning tool mandrels are made from high grade stainless steel on Precision turning centers. The shape, finish, and size are the result of years of use and experimentation by many hand loaders. All of our mandrels fit both our NT-3000 and NT-1000 neck turning tools and most of our older model neck turning tools. Our neck turning tool mandrels measure approximately about .002"" less than the bullet diameter for the caliber. Our expander mandrels are made .001"" larger than the turning mandrels. Using an expander mandrel prior to neck turning sizes the case to fit the neck turning mandrels perfectly. This correct fit makes the turning process more precise and much easier. Any of the mandrels can be used to ""neck"" cases up to the next caliber when used with the NT-EXP (Expander Body).
Specs:
Caliber: 270 Caliber, 6.8mm
Diameter (in): 0.276
Product no.: 749001176
SINCLAIR INTERNATIONAL 7MM (.283") STAINLESS EXPANDER MANDREL
Mfr Part: E28 Our neck turning tool mandrels are made from high grade stainless steel on Precision turning centers. The shape, finish, and size are the result of years of use and experimentation by many hand loaders. All of our mandrels fit both our NT-3000 and NT-1000 neck turning tools and most of our older model neck turning tools. Our neck turning tool mandrels measure approximately about .002"" less than the bullet diameter for the caliber. Our expander mandrels are made .001"" larger than the turning mandrels. Using an expander mandrel prior to neck turning sizes the case to fit the neck turning mandrels perfectly. This correct fit makes the turning process more precise and much easier. Any of the mandrels can be used to ""neck"" cases up to the next caliber when used with the NT-EXP (Expander Body).
SINCLAIR INTERNATIONAL 7MM (.283") STAINLESS EXPANDER MANDREL
Mfr Part: E28 Our neck turning tool mandrels are made from high grade stainless steel on Precision turning centers. The shape, finish, and size are the result of years of use and experimentation by many hand loaders. All of our mandrels fit both our NT-3000 and NT-1000 neck turning tools and most of our older model neck turning tools. Our neck turning tool mandrels measure approximately about .002"" less than the bullet diameter for the caliber. Our expander mandrels are made .001"" larger than the turning mandrels. Using an expander mandrel prior to neck turning sizes the case to fit the neck turning mandrels perfectly. This correct fit makes the turning process more precise and much easier. Any of the mandrels can be used to ""neck"" cases up to the next caliber when used with the NT-EXP (Expander Body).
Specs:
Caliber: 284 Caliber, 7mm
Diameter (in): 0.283
Product no.: 749001179
SINCLAIR INTERNATIONAL 6.5MM (.263") STAINLESS EXPANDER MANDREL
Mfr Part: E26 Our neck turning tool mandrels are made from high grade stainless steel on Precision turning centers. The shape, finish, and size are the result of years of use and experimentation by many hand loaders. All of our mandrels fit both our NT-3000 and NT-1000 neck turning tools and most of our older model neck turning tools. Our neck turning tool mandrels measure approximately about .002"" less than the bullet diameter for the caliber. Our expander mandrels are made .001"" larger than the turning mandrels. Using an expander mandrel prior to neck turning sizes the case to fit the neck turning mandrels perfectly. This correct fit makes the turning process more precise and much easier. Any of the mandrels can be used to ""neck"" cases up to the next caliber when used with the NT-EXP (Expander Body).
SINCLAIR INTERNATIONAL 6.5MM (.263") STAINLESS EXPANDER MANDREL
Mfr Part: E26 Our neck turning tool mandrels are made from high grade stainless steel on Precision turning centers. The shape, finish, and size are the result of years of use and experimentation by many hand loaders. All of our mandrels fit both our NT-3000 and NT-1000 neck turning tools and most of our older model neck turning tools. Our neck turning tool mandrels measure approximately about .002"" less than the bullet diameter for the caliber. Our expander mandrels are made .001"" larger than the turning mandrels. Using an expander mandrel prior to neck turning sizes the case to fit the neck turning mandrels perfectly. This correct fit makes the turning process more precise and much easier. Any of the mandrels can be used to ""neck"" cases up to the next caliber when used with the NT-EXP (Expander Body).
Specs:
Caliber: 6.5mm, 264 Caliber
Diameter (in): 0.263
Product no.: 749001145
SINCLAIR INTERNATIONAL 17 CALIBER (.171") STAINLESS EXPANDER MANDREL
Mfr Part: E17 Our neck turning tool mandrels are made from high grade stainless steel on Precision turning centers. The shape, finish, and size are the result of years of use and experimentation by many hand loaders. All of our mandrels fit both our NT-3000 and NT-1000 neck turning tools and most of our older model neck turning tools. Our neck turning tool mandrels measure approximately about .002"" less than the bullet diameter for the caliber. Our expander mandrels are made .001"" larger than the turning mandrels. Using an expander mandrel prior to neck turning sizes the case to fit the neck turning mandrels perfectly. This correct fit makes the turning process more precise and much easier. Any of the mandrels can be used to ""neck"" cases up to the next caliber when used with the NT-EXP (Expander Body).
SINCLAIR INTERNATIONAL 17 CALIBER (.171") STAINLESS EXPANDER MANDREL
Mfr Part: E17 Our neck turning tool mandrels are made from high grade stainless steel on Precision turning centers. The shape, finish, and size are the result of years of use and experimentation by many hand loaders. All of our mandrels fit both our NT-3000 and NT-1000 neck turning tools and most of our older model neck turning tools. Our neck turning tool mandrels measure approximately about .002"" less than the bullet diameter for the caliber. Our expander mandrels are made .001"" larger than the turning mandrels. Using an expander mandrel prior to neck turning sizes the case to fit the neck turning mandrels perfectly. This correct fit makes the turning process more precise and much easier. Any of the mandrels can be used to ""neck"" cases up to the next caliber when used with the NT-EXP (Expander Body).
Specs:
Caliber: 17 Caliber
Diameter (in): 0.171
Product no.: 749001158
SINCLAIR INTERNATIONAL 338 CALIBER (.337") STAINLESS EXPANDER MANDREL
Mfr Part: E33 Our neck turning tool mandrels are made from high grade stainless steel on Precision turning centers. The shape, finish, and size are the result of years of use and experimentation by many hand loaders. All of our mandrels fit both our NT-3000 and NT-1000 neck turning tools and most of our older model neck turning tools. Our neck turning tool mandrels measure approximately about .002"" less than the bullet diameter for the caliber. Our expander mandrels are made .001"" larger than the turning mandrels. Using an expander mandrel prior to neck turning sizes the case to fit the neck turning mandrels perfectly. This correct fit makes the turning process more precise and much easier. Any of the mandrels can be used to ""neck"" cases up to the next caliber when used with the NT-EXP (Expander Body).
SINCLAIR INTERNATIONAL 338 CALIBER (.337") STAINLESS EXPANDER MANDREL
Mfr Part: E33 Our neck turning tool mandrels are made from high grade stainless steel on Precision turning centers. The shape, finish, and size are the result of years of use and experimentation by many hand loaders. All of our mandrels fit both our NT-3000 and NT-1000 neck turning tools and most of our older model neck turning tools. Our neck turning tool mandrels measure approximately about .002"" less than the bullet diameter for the caliber. Our expander mandrels are made .001"" larger than the turning mandrels. Using an expander mandrel prior to neck turning sizes the case to fit the neck turning mandrels perfectly. This correct fit makes the turning process more precise and much easier. Any of the mandrels can be used to ""neck"" cases up to the next caliber when used with the NT-EXP (Expander Body).
Specs:
Caliber: 338 Caliber
Diameter (in): 0.337
Product no.: 749001161
SINCLAIR INTERNATIONAL 25 CALIBER (.256") STAINLESS EXPANDER MANDREL
Mfr Part: E25 Our neck turning tool mandrels are made from high grade stainless steel on Precision turning centers. The shape, finish, and size are the result of years of use and experimentation by many hand loaders. All of our mandrels fit both our NT-3000 and NT-1000 neck turning tools and most of our older model neck turning tools. Our neck turning tool mandrels measure approximately about .002"" less than the bullet diameter for the caliber. Our expander mandrels are made .001"" larger than the turning mandrels. Using an expander mandrel prior to neck turning sizes the case to fit the neck turning mandrels perfectly. This correct fit makes the turning process more precise and much easier. Any of the mandrels can be used to ""neck"" cases up to the next caliber when used with the NT-EXP (Expander Body).
SINCLAIR INTERNATIONAL 25 CALIBER (.256") STAINLESS EXPANDER MANDREL
Mfr Part: E25 Our neck turning tool mandrels are made from high grade stainless steel on Precision turning centers. The shape, finish, and size are the result of years of use and experimentation by many hand loaders. All of our mandrels fit both our NT-3000 and NT-1000 neck turning tools and most of our older model neck turning tools. Our neck turning tool mandrels measure approximately about .002"" less than the bullet diameter for the caliber. Our expander mandrels are made .001"" larger than the turning mandrels. Using an expander mandrel prior to neck turning sizes the case to fit the neck turning mandrels perfectly. This correct fit makes the turning process more precise and much easier. Any of the mandrels can be used to ""neck"" cases up to the next caliber when used with the NT-EXP (Expander Body).
Specs:
Caliber: 25 Caliber
Diameter (in): 0.256
Product no.: 749001164
SINCLAIR INTERNATIONAL 20 CALIBER (.203") STAINLESS EXPANDER MANDREL
Mfr Part: E20 Our neck turning tool mandrels are made from high grade stainless steel on Precision turning centers. The shape, finish, and size are the result of years of use and experimentation by many hand loaders. All of our mandrels fit both our NT-3000 and NT-1000 neck turning tools and most of our older model neck turning tools. Our neck turning tool mandrels measure approximately about .002"" less than the bullet diameter for the caliber. Our expander mandrels are made .001"" larger than the turning mandrels. Using an expander mandrel prior to neck turning sizes the case to fit the neck turning mandrels perfectly. This correct fit makes the turning process more precise and much easier. Any of the mandrels can be used to ""neck"" cases up to the next caliber when used with the NT-EXP (Expander Body).
SINCLAIR INTERNATIONAL 20 CALIBER (.203") STAINLESS EXPANDER MANDREL
Mfr Part: E20 Our neck turning tool mandrels are made from high grade stainless steel on Precision turning centers. The shape, finish, and size are the result of years of use and experimentation by many hand loaders. All of our mandrels fit both our NT-3000 and NT-1000 neck turning tools and most of our older model neck turning tools. Our neck turning tool mandrels measure approximately about .002"" less than the bullet diameter for the caliber. Our expander mandrels are made .001"" larger than the turning mandrels. Using an expander mandrel prior to neck turning sizes the case to fit the neck turning mandrels perfectly. This correct fit makes the turning process more precise and much easier. Any of the mandrels can be used to ""neck"" cases up to the next caliber when used with the NT-EXP (Expander Body).
Specs:
Caliber: 20 Caliber
Diameter (in): 0.203
Product no.: 749001182
SINCLAIR INTERNATIONAL 6MM (.242") STAINLESS EXPANDER MANDREL
Mfr Part: E24 Our neck turning tool mandrels are made from high grade stainless steel on Precision turning centers. The shape, finish, and size are the result of years of use and experimentation by many hand loaders. All of our mandrels fit both our NT-3000 and NT-1000 neck turning tools and most of our older model neck turning tools. Our neck turning tool mandrels measure approximately about .002"" less than the bullet diameter for the caliber. Our expander mandrels are made .001"" larger than the turning mandrels. Using an expander mandrel prior to neck turning sizes the case to fit the neck turning mandrels perfectly. This correct fit makes the turning process more precise and much easier. Any of the mandrels can be used to ""neck"" cases up to the next caliber when used with the NT-EXP (Expander Body).
SINCLAIR INTERNATIONAL 6MM (.242") STAINLESS EXPANDER MANDREL
Mfr Part: E24 Our neck turning tool mandrels are made from high grade stainless steel on Precision turning centers. The shape, finish, and size are the result of years of use and experimentation by many hand loaders. All of our mandrels fit both our NT-3000 and NT-1000 neck turning tools and most of our older model neck turning tools. Our neck turning tool mandrels measure approximately about .002"" less than the bullet diameter for the caliber. Our expander mandrels are made .001"" larger than the turning mandrels. Using an expander mandrel prior to neck turning sizes the case to fit the neck turning mandrels perfectly. This correct fit makes the turning process more precise and much easier. Any of the mandrels can be used to ""neck"" cases up to the next caliber when used with the NT-EXP (Expander Body).
Specs:
Caliber: 243 Caliber, 6mm
Diameter (in): 0.242
Product no.: 749001183
SINCLAIR INTERNATIONAL 30 CALIBER (.307") STAINLESS EXPANDER MANDREL
Mfr Part: E30 Our neck turning tool mandrels are made from high grade stainless steel on Precision turning centers. The shape, finish, and size are the result of years of use and experimentation by many hand loaders. All of our mandrels fit both our NT-3000 and NT-1000 neck turning tools and most of our older model neck turning tools. Our neck turning tool mandrels measure approximately about .002"" less than the bullet diameter for the caliber. Our expander mandrels are made .001"" larger than the turning mandrels. Using an expander mandrel prior to neck turning sizes the case to fit the neck turning mandrels perfectly. This correct fit makes the turning process more precise and much easier. Any of the mandrels can be used to ""neck"" cases up to the next caliber when used with the NT-EXP (Expander Body).
SINCLAIR INTERNATIONAL 30 CALIBER (.307") STAINLESS EXPANDER MANDREL
Mfr Part: E30 Our neck turning tool mandrels are made from high grade stainless steel on Precision turning centers. The shape, finish, and size are the result of years of use and experimentation by many hand loaders. All of our mandrels fit both our NT-3000 and NT-1000 neck turning tools and most of our older model neck turning tools. Our neck turning tool mandrels measure approximately about .002"" less than the bullet diameter for the caliber. Our expander mandrels are made .001"" larger than the turning mandrels. Using an expander mandrel prior to neck turning sizes the case to fit the neck turning mandrels perfectly. This correct fit makes the turning process more precise and much easier. Any of the mandrels can be used to ""neck"" cases up to the next caliber when used with the NT-EXP (Expander Body).
Specs:
Caliber: 30 Caliber
Diameter (in): 0.307
Product no.: 749001187
SINCLAIR INTERNATIONAL 22 CALIBER (.223") STAINLESS EXPANDER MANDREL
Mfr Part: E22 Our neck turning tool mandrels are made from high grade stainless steel on Precision turning centers. The shape, finish, and size are the result of years of use and experimentation by many hand loaders. All of our mandrels fit both our NT-3000 and NT-1000 neck turning tools and most of our older model neck turning tools. Our neck turning tool mandrels measure approximately about .002"" less than the bullet diameter for the caliber. Our expander mandrels are made .001"" larger than the turning mandrels. Using an expander mandrel prior to neck turning sizes the case to fit the neck turning mandrels perfectly. This correct fit makes the turning process more precise and much easier. Any of the mandrels can be used to ""neck"" cases up to the next caliber when used with the NT-EXP (Expander Body).
SINCLAIR INTERNATIONAL 22 CALIBER (.223") STAINLESS EXPANDER MANDREL
Mfr Part: E22 Our neck turning tool mandrels are made from high grade stainless steel on Precision turning centers. The shape, finish, and size are the result of years of use and experimentation by many hand loaders. All of our mandrels fit both our NT-3000 and NT-1000 neck turning tools and most of our older model neck turning tools. Our neck turning tool mandrels measure approximately about .002"" less than the bullet diameter for the caliber. Our expander mandrels are made .001"" larger than the turning mandrels. Using an expander mandrel prior to neck turning sizes the case to fit the neck turning mandrels perfectly. This correct fit makes the turning process more precise and much easier. Any of the mandrels can be used to ""neck"" cases up to the next caliber when used with the NT-EXP (Expander Body).
Specs:
Caliber: 22 Caliber
Diameter (in): 0.223
Product no.: 749011523
SINCLAIR INTERNATIONAL 8MM (.322") STAINLESS EXPANDER MANDREL
Mfr Part: E32 Sinclair Expander Mandrel - oversized, 8mm
SINCLAIR INTERNATIONAL 8MM (.322") STAINLESS EXPANDER MANDREL
Mfr Part: E32 Sinclair Expander Mandrel - oversized, 8mm
Specs:
Caliber: 8mm, 32 Caliber
Diameter (in): 0.322
Enhance your neck turning precision with our STAINLESS STEEL EXPANDER MANDRELS. Perfect fit for 270 Caliber cases! 🔧 Get yours today!
In stock
£21.90
£19.90 - £33.90
Classical view
Mobile view