The SPRINGFIELD XD MAGLOC EASYFIT MAGWELL is a bolt-on accessory that facilitates faster magazine changes for Springfield XD pistols in 9mm/.40 S&W.
Constructed from lightweight molded polymer, it won't damage the pistol's finish and also protects the magwell from wear and tear.
Installation is straightforward with a steel retention screw, but may require minor trimming for certain models post-March 2005; not suitable for compact or sub-compact versions.
Attributes
Finish:Black
Model:XD
Weapon type:Springfield
Delivery weight:0.014kg
Shipping height:10mm
Shipping width:102mm
Shipping length:163mm
UPC:625214016205
Item details
US export classification: 0A501.y.1
Specifications:
Finish: Black
Make: Springfield
Model: XD
31.931.91GBP
31.9GBP£31.90
Prices inclusive of duty & VAT.
Product no.: 100006212
Mfr. No.: NONE
625214016205 Bolt-on magwell funnels magazine directly into the pistol for quick reloads without fumbling or distraction. Lightweight molded polymer won’t mar, scrape, or dent, plus it protects the magwell opening from damage. Just insert into the bottom of the grip and tighten the included steel retention screw for a snug, form-fitting, grip. Separate models available for 9mm/.40 S&W.
In stock
Delivery time approx. 7-14 days. More than 10 pieces in USA warehouse
Delivery time approx. 7-14 days. More than 10 pieces in USA warehouse
Bolt-on magwell funnels magazine directly into the pistol for quick reloads without fumbling or distraction. Lightweight molded polymer won’t mar, scrape, or dent, plus it protects the magwell opening from damage. Just insert into the bottom of the grip and tighten the included steel retention screw for a snug, form-fitting, grip. Separate models available for 9mm/.40 S&W.
Top takeaways
The SPRINGFIELD XD MAGLOC EASYFIT MAGWELL is a bolt-on accessory that facilitates faster magazine changes for Springfield XD pistols in 9mm/.40 S&W.
Constructed from lightweight molded polymer, it won't damage the pistol's finish and also protects the magwell from wear and tear.
Installation is straightforward with a steel retention screw, but may require minor trimming for certain models post-March 2005; not suitable for compact or sub-compact versions.
Attributes
Finish:Black
Model:XD
Weapon type:Springfield
Delivery weight:0.014kg
Shipping height:10mm
Shipping width:102mm
Shipping length:163mm
UPC:625214016205
Item details
US export classification: 0A501.y.1
Customers reviews
Customer ratings (7)
2.9 / 5
Recommended with reservations
Not what expected about installation 20/02/2018
Does not fit as expected. Had to trim a lot and still does not fit well. There is a gap at the bottom. The holding screw only makes a hole on the frame. Bit disappointed indeed.
Recommended with reservations
serves its purpose, hole in grip 14/07/2017
I bought this for my XD 40. It fits the hole at the bottom of the grip but does not take in the whole insert and it creates a gap I have to use a small mallet to push it. The stopper screw at the back of the magwell makes a hole in my grip. I have to put glue to hold the sides of the magwell because it creates a gap on the side. I have to put glue to in between the bottom part of the grip and the magwell to hold it in place because the screw was not able to hold the grip in place it slowly slips. I have to make some resizing of the insert of the magwell so that it will fit the bottom of the grip but despite all these it serves it purpose.
Recommended with reservations
EASY FIT MAG WELL FOR XD 28/04/2014
I use this on my xd service 45acp works great fits great with no modifcation drop in two screws and your done.
Recommended with reservations
poor fit 09/10/2012
installed on my xd tac 9mm the tab on it didnt fit at all ended up removing it and using the screw drectly into my grip very flexable and thin felling. way better off getting a metal mag well.
Not recommended
Not so sure about this product 19/03/2012
I installed one of these on a duty weapon for a friend of mine. It felt flimsy and shortly broke. I can't recommend this product.
Definitely recommended
Easy install and good value. 10/11/2011
I bought this from the maker in CA before I saw it at Brownells and installed this on my XD Tactical 5" 45 ACP Pistol in less than 5 minutes. It really helps guide fresh mags into the gun and fits the gun and mags well. I am not into Race Gun shooting but I believe this will continue to work well on my primary carry/duty gun.
Slightly recommend
Too bad it's made out of Nylon 20/04/2011
Mine broke after 2 or 3 matches because of a bobbled magazine change. Make no mistake, this is made of hard nylon/plastic/polymer/whatever and it can break as mine did. No warranty is mentioned at all...so buyer beware.
It was very easy to install and it did work well with the factory magazines (including the opening at the front for easy mag removal). Just a shame that it is not made of something metal-based. I only bought it because it was the only thing available in Canada.
Last viewed
Oops! Something went wrong.
We encountered an error while loading this content. Please refresh the page to continue. If the issue persists, contact our customer support.
Upgrade your Springfield XD with the EasyFit Magwell for quick reloads! 🔄 Lightweight and durable, perfect for 9mm/.40 S&W models.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.