THE SAFER, 2nd GENERATION RUST AND BLUE REMOVER Attacks The Rust, Not The Steel-pH Neutral, Non-Toxic- Contains No Hazardous Components
Effectively removes heavy rust, scale and bluing without damaging your expensive firearms or parts, because it attacks the rust, not the base metal. Works great on both steel and cast iron without dangerous fumes; does not cause hydrogen embrittlement. pH neutral solution won't eat your clothing or bench. Does not attack softer metals like brass, copper, zinc or aluminum so there's no need to remove inlays, sight beads or solder-on ribs before immersion. Highly concentrated liquid really saves money. One gallon of Brownells Steel White can be diluted with water to make up to 20 gallons of safe, economical, rust and blue removing solution. Removes light rust and bluing in as little as 5 minutes; immerse in solution longer for heavier rust or scale. Works great at room temperature but can be heated to 120° F. to increase speed of rust removal. Per instructions use 5 to 1 ratio for heavy rust.
SPECS: Available in quart (946ml) and gallon (3.8L). pH neutral liquid.
More...
Customer ratings for BROWNELLS STEEL WHITE RUST & BLUE REMOVER 1 QUART (32OZ)
Number of ratings: 3
From brownells.com: 3
Average rating: 3.7
This product works!(04/08/2009)
Follow the directions, and watch the old blue disappear. I polished the treated metal with #0000 steel wool, before bluing. I could not be happier with the finished O/U barrels.
Waste of money(20/07/2012)
Mixed according to directions at 5 to one. Tried to use it on a thoroughly degreased 1911 slide and S&W revolver. Neither had much rust, just wanted to remove the blue prior to polishing. After 1 hour no discernible effect. Dumped mixture and Re mixed at a measured 5 to one and tried again. By the second hour there was some slight progress but not much. Threw it out and polished by hand.
great stuff very impressed(06/06/2013)
used to redo 3 single shots shotguns and a semi auto shotgun they were sitting in a closet for years mixed the solution a lil strong as soon as placed them in the bath the blueing started to vanish along with the rust
Product no.: 082055032 BROWNELLS STEEL WHITE RUST & BLUE REMOVER 1 QUART (32OZ) Mfr Part: NONE050806104235 Effectively removes heavy rust, scale and bluing without damaging your expensive firearms or parts, because it attacks the rust, not the base metal. Works great on both steel and cast iron without dangerous fumes; does not cause hydrogen embrittlement. pH neutral solution won't eat your clothing or bench. Does not attack softer metals like brass, copper, zinc or aluminum so there's no need to remove inlays, sight beads or solder-on ribs before immersion. Highly concentrated liquid really saves money. One gallon of Brownells Steel White can be diluted with water to make up to 20 gallons of safe, economical, rust and blue removing solution. Removes light rust and bluing in as little as 5 minutes; immerse in solution longer for heavier rust or scale. Works great at room temperature but can be heated to 120° F. to increase speed of rust removal. Per instructions use 5 to 1 ratio for heavy rust.
314.9GBP80£314.90
*
Delivery time approx. 7-14 days. More than 10 pieces in USA warehouse
Effectively removes heavy rust and bluing from steel and cast iron without damaging the base metal or producing dangerous fumes.
Safe for use with other metals like brass, copper, zinc, and aluminum; no need to disassemble parts before immersion.
Concentrated formula can be diluted to make up to 20 gallons of rust remover from one gallon of product, working at room temperature or heated for faster results.
THE SAFER, 2nd GENERATION RUST AND BLUE REMOVER Attacks The Rust, Not The Steel-pH Neutral, Non-Toxic- Contains No Hazardous Components
Effectively removes heavy rust, scale and bluing without damaging your expensive firearms or parts, because it attacks the rust, not the base metal. Works great on both steel and cast iron without dangerous fumes; does not cause hydrogen embrittlement. pH neutral solution won't eat your clothing or bench. Does not attack softer metals like brass, copper, zinc or aluminum so there's no need to remove inlays, sight beads or solder-on ribs before immersion. Highly concentrated liquid really saves money. One gallon of Brownells Steel White can be diluted with water to make up to 20 gallons of safe, economical, rust and blue removing solution. Removes light rust and bluing in as little as 5 minutes; immerse in solution longer for heavier rust or scale. Works great at room temperature but can be heated to 120° F. to increase speed of rust removal. Per instructions use 5 to 1 ratio for heavy rust.
SPECS: Available in quart (946ml) and gallon (3.8L). pH neutral liquid.
More...
Customer ratings for BROWNELLS STEEL WHITE RUST & BLUE REMOVER 1 QUART (32OZ)
Number of ratings: 3
From brownells.com: 3
Average rating: 3.7
This product works!(04/08/2009)
Follow the directions, and watch the old blue disappear. I polished the treated metal with #0000 steel wool, before bluing. I could not be happier with the finished O/U barrels.
Waste of money(20/07/2012)
Mixed according to directions at 5 to one. Tried to use it on a thoroughly degreased 1911 slide and S&W revolver. Neither had much rust, just wanted to remove the blue prior to polishing. After 1 hour no discernible effect. Dumped mixture and Re mixed at a measured 5 to one and tried again. By the second hour there was some slight progress but not much. Threw it out and polished by hand.
great stuff very impressed(06/06/2013)
used to redo 3 single shots shotguns and a semi auto shotgun they were sitting in a closet for years mixed the solution a lil strong as soon as placed them in the bath the blueing started to vanish along with the rust