We have a large assortment of rod guides that we make for popular target/varmint rimfire rifles and are constantly adding more models to our selection. Rimfire guides can’t have an O-ring due to the dimensions we are working with. Making rod guides to allow you to clean from the breech on rimfires is a little more complex due to the ejectors and trigger parts that are in the way. All of our rimfire rod guides will accept our Sinclair Solvent Ports, except for the Anschutz Model 54 guide. Does not include integral solvent port.
More...
Customer ratings for SINCLAIR INTERNATIONAL HALL ACTION RIMFIRE ROD GUIDE
Number of ratings: 10
From brownells.com: 10
Average rating: 3.5
Nice guide(21/04/2011)
Fits nicely in my savage mark II
Savage Mark 1(27/02/2012)
Works also well for the single shot Savage Mark 1
Savage Mark II TR(03/07/2014)
I bought this thinking it would fit my Savage Mark II TR, it did not. It is possible I can modify/file it to work at some point, but that is not the point. It is too tight to go all the way in. I did not think there was any differences between the the different mark II receivers... figured they were all the same. There may or may not be. But I know this does not fit in a Savage Mark II TR. Booo
It works on Savage Mark I FVT(09/06/2016)
I have a new Savage FVT for teaching the Boy Scout Merit Badge Program. I needed a bore guide and ordered this one. It fits great, you just need to pull the trigger to get it all the way in.
Doesn't fit the Savage Mark II(11/05/2017)
I should have read the reviews first. I bought this for my Savage Mark II BTV and it doesn't fit as another reviewer has said.
I plan on keeping it to see if it can be modified but it doesn't work as is. The diameter is correct but it gets hung up on something, I believe the ejector but haven't had time to look as yet.
Not sure what savage rifles this thing is supposed to fit but certainly not the Mark II
REALLY DISSAPONTED!!!!!!!!!!!!!!!!!!(16/10/2010)
The rod guide is so tight in the action that I cannot get it seated against the breech. The bottom is completely open, so that it can clear the fixed portion of the feed ramp. This would allow solvent to run into the magazine well and stock. The "protection" provided for the chamber against "cleaning rod damage" is completely offset by the fact I HAD TO BEAT IT OUT OF THE ACTION WITH A BRASS DRIFT.
Great Product(24/03/2012)
Makes Cleaning a Pleasure, as ALL SINCLAIR Product. work Great
Works fine with CZ455(08/08/2011)
I wasn't sure if this product will be useful on a CZ455 due to the protruding ejector that can scratch your stainless steel rod. Given several forums discussion, I went anyway purchasing it. On my CZ455 .22lr, I use this bore guide along with a .17mm rod. It works perfectly.
Works, but could be better(05/02/2012)
Works fine on my CZ452 varmint using a .17 cal. Dewie coated rod & using a thread adapter & a .22 cal. jag or brush. But, I have to hold the guide from comming out when I pull the rod out, but, I can live with that.
Works like a charm(05/12/2013)
I bought this to see if it would fit my Remington model 510 Targetmaster after talking to a representative from Brownell's. It fits perfectly, slips right into the space available, and works great. And as usual, customer service at Brownell's was awesome. The rep looked up both the model 504 and 510 to compare their designs, and was very honest and helpful. Another great buy from Brownell's/Sinclair.
Product no.: 749002569 SINCLAIR INTERNATIONAL HALL ACTION RIMFIRE ROD GUIDE Mfr Part: RG4HALL We have a large assortment of rod guides that we make for popular target/varmint rimfire rifles and are constantly adding more models to our selection. Rimfire guides can’t have an O-ring due to the dimensions we are working with. Making rod guides to allow you to clean from the breech on rimfires is a little more complex due to the ejectors and trigger parts that are in the way. All of our rimfire rod guides will accept our Sinclair Solvent Ports, except for the Anschutz Model 54 guide. Does not include integral solvent port.
Product no.: 749002574 SINCLAIR INTERNATIONAL STOLLE SWINDELHURST RIMFIRE ROD GUIDE Mfr Part: RG4SWIN We have a large assortment of rod guides that we make for popular target/varmint rimfire rifles and are constantly adding more models to our selection. Rimfire guides can’t have an O-ring due to the dimensions we are working with. Making rod guides to allow you to clean from the breech on rimfires is a little more complex due to the ejectors and trigger parts that are in the way. All of our rimfire rod guides will accept our Sinclair Solvent Ports, except for the Anschutz Model 54 guide. Does not include integral solvent port.
SINCLAIR INTERNATIONAL produces a wide range of rod guides for various target/varmint rimfire rifles, with ongoing additions to their lineup.
The rimfire rod guides are designed to accommodate cleaning from the breech, considering the complexity of rimfire rifle ejectors and trigger parts.
While these rod guides are compatible with Sinclair Solvent Ports, the Anschutz Model 54 guide is an exception and does not include an integral solvent port.
Product no.: 749002587 SINCLAIR INTERNATIONAL BROWNING A-BOLT RIMFIRE ROD GUIDE Mfr Part: RG4BAB We have a large assortment of rod guides that we make for popular target/varmint rimfire rifles and are constantly adding more models to our selection. Rimfire guides can’t have an O-ring due to the dimensions we are working with. Making rod guides to allow you to clean from the breech on rimfires is a little more complex due to the ejectors and trigger parts that are in the way. All of our rimfire rod guides will accept our Sinclair Solvent Ports, except for the Anschutz Model 54 guide. Does not include integral solvent port.
Product no.: 749002619 SINCLAIR INTERNATIONAL REMINGTON 504 RIMFIRE ROD GUIDE Mfr Part: RG4504 We have a large assortment of rod guides that we make for popular target/varmint rimfire rifles and are constantly adding more models to our selection. Rimfire guides can’t have an O-ring due to the dimensions we are working with. Making rod guides to allow you to clean from the breech on rimfires is a little more complex due to the ejectors and trigger parts that are in the way. All of our rimfire rod guides will accept our Sinclair Solvent Ports, except for the Anschutz Model 54 guide. Does not include integral solvent port.
Product no.: 749002597 SINCLAIR INTERNATIONAL ANSCHUTZ 1451T RIMFIRE ROD GUIDE Mfr Part: RG451T We have a large assortment of rod guides that we make for popular target/varmint rimfire rifles and are constantly adding more models to our selection. Rimfire guides can’t have an O-ring due to the dimensions we are working with. Making rod guides to allow you to clean from the breech on rimfires is a little more complex due to the ejectors and trigger parts that are in the way. All of our rimfire rod guides will accept our Sinclair Solvent Ports, except for the Anschutz Model 54 guide. Does not include integral solvent port.
The SINCLAIR INTERNATIONAL ANSCHUTZ 1451T RIMFIRE ROD GUIDE is designed specifically for target/varmint rimfire rifles and is part of a large assortment of rod guides.
These rimfire rod guides are complex to make due to the absence of an O-ring and the presence of ejectors and trigger parts, but they facilitate cleaning from the breech.
While the rod guides are compatible with Sinclair Solvent Ports, the Anschutz Model 54 guide is an exception and does not include an integral solvent port.
Product no.: 749002613 SINCLAIR INTERNATIONAL ANSCHUTZ MODEL 64 RIMFIRE ROD GUIDE Mfr Part: RG4A64 We have a large assortment of rod guides that we make for popular target/varmint rimfire rifles and are constantly adding more models to our selection. Rimfire guides can’t have an O-ring due to the dimensions we are working with. Making rod guides to allow you to clean from the breech on rimfires is a little more complex due to the ejectors and trigger parts that are in the way. All of our rimfire rod guides will accept our Sinclair Solvent Ports, except for the Anschutz Model 54 guide. Does not include integral solvent port.
Product no.: 749002608 SINCLAIR INTERNATIONAL COOPER MODEL 57 RIMFIRE ROD GUIDE Mfr Part: RG4C57 We have a large assortment of rod guides that we make for popular target/varmint rimfire rifles and are constantly adding more models to our selection. Rimfire guides can’t have an O-ring due to the dimensions we are working with. Making rod guides to allow you to clean from the breech on rimfires is a little more complex due to the ejectors and trigger parts that are in the way. All of our rimfire rod guides will accept our Sinclair Solvent Ports, except for the Anschutz Model 54 guide. Does not include integral solvent port.
Product no.: 749002614 SINCLAIR INTERNATIONAL CZ 452 RIMFIRE ROD GUIDE Mfr Part: RG452CZ We have a large assortment of rod guides that we make for popular target/varmint rimfire rifles and are constantly adding more models to our selection. Rimfire guides can’t have an O-ring due to the dimensions we are working with. Making rod guides to allow you to clean from the breech on rimfires is a little more complex due to the ejectors and trigger parts that are in the way. All of our rimfire rod guides will accept our Sinclair Solvent Ports, except for the Anschutz Model 54 guide. Does not include integral solvent port.
Product no.: 749002590 SINCLAIR INTERNATIONAL REMINGTON MODEL 37 RIMFIRE ROD GUIDE Mfr Part: RG4R37 We have a large assortment of rod guides that we make for popular target/varmint rimfire rifles and are constantly adding more models to our selection. Rimfire guides can’t have an O-ring due to the dimensions we are working with. Making rod guides to allow you to clean from the breech on rimfires is a little more complex due to the ejectors and trigger parts that are in the way. All of our rimfire rod guides will accept our Sinclair Solvent Ports, except for the Anschutz Model 54 guide. Does not include integral solvent port.
SINCLAIR INTERNATIONAL manufactures a variety of rod guides for rimfire rifles, specifically designed for cleaning from the breech, compatible with Sinclair Solvent Ports.
The rod guides are made without O-rings to accommodate the specific dimensions of rimfire rifles and to navigate around ejectors and trigger parts.
The product fits the Remington Model 37 action but does not include an integral solvent port, and it is not compatible with the Anschutz Model 54 guide.
Product no.: 749002604 SINCLAIR INTERNATIONAL SAKO FINNFIRE RIMFIRE ROD GUIDE Mfr Part: RG4FIN We have a large assortment of rod guides that we make for popular target/varmint rimfire rifles and are constantly adding more models to our selection. Rimfire guides can’t have an O-ring due to the dimensions we are working with. Making rod guides to allow you to clean from the breech on rimfires is a little more complex due to the ejectors and trigger parts that are in the way. All of our rimfire rod guides will accept our Sinclair Solvent Ports, except for the Anschutz Model 54 guide. Does not include integral solvent port.
SINCLAIR INTERNATIONAL offers a variety of rod guides for rimfire rifles, specifically designed for target/varmint shooting, including a guide for the Sako Finnfire.
Rimfire rod guides from SINCLAIR INTERNATIONAL are designed to accommodate cleaning from the breech, despite the complexity added by ejectors and trigger parts.
These rod guides are compatible with Sinclair Solvent Ports, with the exception of the Anschutz Model 54 guide, and do not come with an integral solvent port.
Product no.: 749002581 SINCLAIR INTERNATIONAL ULTRALIGHT ARMS MODEL 20 RIMFIRE ROD GUIDE Mfr Part: RG4ULT We have a large assortment of rod guides that we make for popular target/varmint rimfire rifles and are constantly adding more models to our selection. Rimfire guides can’t have an O-ring due to the dimensions we are working with. Making rod guides to allow you to clean from the breech on rimfires is a little more complex due to the ejectors and trigger parts that are in the way. All of our rimfire rod guides will accept our Sinclair Solvent Ports, except for the Anschutz Model 54 guide. Does not include integral solvent port.
SINCLAIR INTERNATIONAL offers a variety of rod guides for target/varmint rimfire rifles, including the Ultra Lite Model 20.
Rimfire rod guides are designed without O-rings and can accommodate Sinclair Solvent Ports, except for the Anschutz Model 54 guide.
Cleaning rimfire rifles from the breech is more complex, but these rod guides are tailored to navigate around ejectors and trigger parts.
Attributes
Action Fit:
Ultra Lite Model 20''
Delivery weight: 0.045kgShipping height: 8mmShipping width: 71mmShipping length: 231mm
Item details
Made in USA
Product no.: 749002623 SINCLAIR INTERNATIONAL RUGER 77/22, WIN 52 RIMFIRE ROD GUIDE Mfr Part: RG4W52 We have a large assortment of rod guides that we make for popular target/varmint rimfire rifles and are constantly adding more models to our selection. Rimfire guides can’t have an O-ring due to the dimensions we are working with. Making rod guides to allow you to clean from the breech on rimfires is a little more complex due to the ejectors and trigger parts that are in the way. All of our rimfire rod guides will accept our Sinclair Solvent Ports, except for the Anschutz Model 54 guide. Does not include integral solvent port.
SINCLAIR INTERNATIONAL manufactures a variety of rod guides for popular target/varmint rimfire rifles, including those for Ruger 77/22, Suhl 150, C, D models.
These rimfire rod guides are designed to allow breech cleaning, accommodating the complex space around ejectors and trigger parts.
The rod guides are compatible with Sinclair Solvent Ports, with the exception of the Anschutz Model 54 guide, and they do not come with an integral solvent port.
Product no.: 749002622 SINCLAIR INTERNATIONAL REMINGTON 40X RIMFIRE ROD GUIDE Mfr Part: RG4R40X We have a large assortment of rod guides that we make for popular target/varmint rimfire rifles and are constantly adding more models to our selection. Rimfire guides can’t have an O-ring due to the dimensions we are working with. Making rod guides to allow you to clean from the breech on rimfires is a little more complex due to the ejectors and trigger parts that are in the way. All of our rimfire rod guides will accept our Sinclair Solvent Ports, except for the Anschutz Model 54 guide. Does not include integral solvent port.
SINCLAIR INTERNATIONAL offers a wide variety of rod guides for rimfire rifles, specifically designed for target/varmint shooting.
The rimfire rod guides are designed to accommodate cleaning from the breech, despite the complexity added by ejectors and trigger parts.
These rod guides are compatible with Sinclair Solvent Ports, with the exception of the Anschutz Model 54 guide, and are tailored for specific actions like the Remington 40X and Cooper 36.
Product no.: 749002616 SINCLAIR INTERNATIONAL KIMBER 82 RIMFIRE ROD GUIDE Mfr Part: RG4K82 We have a large assortment of rod guides that we make for popular target/varmint rimfire rifles and are constantly adding more models to our selection. Rimfire guides can’t have an O-ring due to the dimensions we are working with. Making rod guides to allow you to clean from the breech on rimfires is a little more complex due to the ejectors and trigger parts that are in the way. All of our rimfire rod guides will accept our Sinclair Solvent Ports, except for the Anschutz Model 54 guide. Does not include integral solvent port.
We have a large assortment of rod guides that we make for popular target/varmint rimfire rifles and are constantly adding more models to our selection. Rimfire guides can’t have an O-ring due to the dimensions we are working with. Making rod guides to allow you to clean from the breech on rimfires is a little more complex due to the ejectors and trigger parts that are in the way. All of our rimfire rod guides will accept our Sinclair Solvent Ports, except for the Anschutz Model 54 guide. Does not include integral solvent port.
More...
Customer ratings for SINCLAIR INTERNATIONAL HALL ACTION RIMFIRE ROD GUIDE
Number of ratings: 10
From brownells.com: 10
Average rating: 3.5
Nice guide(21/04/2011)
Fits nicely in my savage mark II
Savage Mark 1(27/02/2012)
Works also well for the single shot Savage Mark 1
Savage Mark II TR(03/07/2014)
I bought this thinking it would fit my Savage Mark II TR, it did not. It is possible I can modify/file it to work at some point, but that is not the point. It is too tight to go all the way in. I did not think there was any differences between the the different mark II receivers... figured they were all the same. There may or may not be. But I know this does not fit in a Savage Mark II TR. Booo
It works on Savage Mark I FVT(09/06/2016)
I have a new Savage FVT for teaching the Boy Scout Merit Badge Program. I needed a bore guide and ordered this one. It fits great, you just need to pull the trigger to get it all the way in.
Doesn't fit the Savage Mark II(11/05/2017)
I should have read the reviews first. I bought this for my Savage Mark II BTV and it doesn't fit as another reviewer has said.
I plan on keeping it to see if it can be modified but it doesn't work as is. The diameter is correct but it gets hung up on something, I believe the ejector but haven't had time to look as yet.
Not sure what savage rifles this thing is supposed to fit but certainly not the Mark II
REALLY DISSAPONTED!!!!!!!!!!!!!!!!!!(16/10/2010)
The rod guide is so tight in the action that I cannot get it seated against the breech. The bottom is completely open, so that it can clear the fixed portion of the feed ramp. This would allow solvent to run into the magazine well and stock. The "protection" provided for the chamber against "cleaning rod damage" is completely offset by the fact I HAD TO BEAT IT OUT OF THE ACTION WITH A BRASS DRIFT.
Great Product(24/03/2012)
Makes Cleaning a Pleasure, as ALL SINCLAIR Product. work Great
Works fine with CZ455(08/08/2011)
I wasn't sure if this product will be useful on a CZ455 due to the protruding ejector that can scratch your stainless steel rod. Given several forums discussion, I went anyway purchasing it. On my CZ455 .22lr, I use this bore guide along with a .17mm rod. It works perfectly.
Works, but could be better(05/02/2012)
Works fine on my CZ452 varmint using a .17 cal. Dewie coated rod & using a thread adapter & a .22 cal. jag or brush. But, I have to hold the guide from comming out when I pull the rod out, but, I can live with that.
Works like a charm(05/12/2013)
I bought this to see if it would fit my Remington model 510 Targetmaster after talking to a representative from Brownell's. It fits perfectly, slips right into the space available, and works great. And as usual, customer service at Brownell's was awesome. The rep looked up both the model 504 and 510 to compare their designs, and was very honest and helpful. Another great buy from Brownell's/Sinclair.