Over 300,000 customers - we say thank you!

40,000+ products for hunting and shooting sports

STRIKE INDUSTRIES
ULTRALIGHT MULTI-FUNTION END PLATE & ANTI-ROTATION CASTLE NUT

793811764482 430105310
The Strike Industries Ultralight Multi-Function End Plate and Anti-Rotation Castle Nut are designed to update and upgrade the often neglected castle nut and endplate system. Now available in an ultralight 7075-T6 aluminum version that is anodized in color options to customize the look of your AR. While the traditional endplate and castle nut works extremely well in retaining your receiver extension, the peening of the castle nut is not conducive to rebuilding or upgrading. With the vast amount of aftermarket support for the AR system today, SI feels that there’s a need for a secure system as adaptive as you are. Enter the MFEP and ACN. The SI MFEP and ACN offers a built-in anti-rotation QD socket and sling loops. The MFEP is reversible to orientate sling loops to desired side. The Anti-Rotation Castle Nut (ACN) is specifically designed to work with the Multi-Function End Plate (MFEP). Instead of peening the endplate to secure the castle nut, a set screw fulfills this function to allow for multiple uses as you upgrade or update your build. Also never worry about finding a flying takedown pin detent and spring again as there is an included set screw on the MFEP for ease of installation or removal. Consider the Strike Industries Ultralight Multi-Function End Plate and Black Anti-Rotation Castle Nut for your next build or upgrade for both functionality and form of your AR-15 and/or AR-10. Product Contents: x1 Multi-function end plate x1 Anti-rotation castle nut x1 Set screw for anti-rotation x1 Set screw for detent and spring x1 Loctite® Threadlocker Blue 242® x1 Warning card Product Features: End plate set screw to retain takedown pin detent and spring for ease of installation or removal Multi-Function End Plate is reversible to orientate sling loops to desired side No peening or staking needed with the Anti-Rotation Castle Nut and Multi-Function End Plate design Anti-rotation QD socket Multiple sling loop attachment points Ultralight anodized 7075-T6 aluminum construction COMPATIBILITY: Mil-Spec AR-15 and AR-10 ArmaLite/DPMS pattern upper receivers Torque: Do not exceed 35 ft/lbs (47.45 nM) for the castle nut DISCLAIMER: Anodized areas that touch between end plate and castle nut will have expected minor scratches from torqueing of castle nut Due to numerous factors that take place during the anodization process, the color lines from batch to batch of a certain product may vary WARNING: Before every use, always check proper function of your QD mount and/or sling loop and any wear and tear from use Always have your weapon in the SAFE position when not being fired Always follow all firearms safety rules and never point your weapon at anything you are not willing to destroy -CALIFORNIA PROPOSITION 65 WARNING:- WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
54.9 54.9 1 GBP
Product no.: 430105310
STRIKE INDUSTRIES FDE MULTI-FUNCTION END PLATE W/ANTI-ROTATION CASTLE NUT BLCK
Mfr Part: SI-AR-UL-MFEP&A 793811764482 The Strike Industries Ultralight Multi-Function End Plate and Anti-Rotation Castle Nut are designed to update and upgrade the often neglected castle nut and endplate system. Now available in an ultralight 7075-T6 aluminum version that is anodized in color options to customize the look of your AR. While the traditional endplate and castle nut works extremely well in retaining your receiver extension, the peening of the castle nut is not conducive to rebuilding or upgrading. With the vast amount of aftermarket support for the AR system today, SI feels that there’s a need for a secure system as adaptive as you are. Enter the MFEP and ACN. The SI MFEP and ACN offers a built-in anti-rotation QD socket and sling loops. The MFEP is reversible to orientate sling loops to desired side. The Anti-Rotation Castle Nut (ACN) is specifically designed to work with the Multi-Function End Plate (MFEP). Instead of peening the endplate to secure the castle nut, a set screw fulfills this function to allow for multiple uses as you upgrade or update your build. Also never worry about finding a flying takedown pin detent and spring again as there is an included set screw on the MFEP for ease of installation or removal. Consider the Strike Industries Ultralight Multi-Function End Plate and Black Anti-Rotation Castle Nut for your next build or upgrade for both functionality and form of your AR-15 and/or AR-10. Product Contents: x1 Multi-function end plate x1 Anti-rotation castle nut x1 Set screw for anti-rotation x1 Set screw for detent and spring x1 Loctite® Threadlocker Blue 242® x1 Warning card Product Features: End plate set screw to retain takedown pin detent and spring for ease of installation or removal Multi-Function End Plate is reversible to orientate sling loops to desired side No peening or staking needed with the Anti-Rotation Castle Nut and Multi-Function End Plate design Anti-rotation QD socket Multiple sling loop attachment points Ultralight anodized 7075-T6 aluminum construction COMPATIBILITY: Mil-Spec AR-15 and AR-10 ArmaLite/DPMS pattern upper receivers Torque: Do not exceed 35 ft/lbs (47.45 nM) for the castle nut DISCLAIMER: Anodized areas that touch between end plate and castle nut will have expected minor scratches from torqueing of castle nut Due to numerous factors that take place during the anodization process, the color lines from batch to batch of a certain product may vary WARNING: Before every use, always check proper function of your QD mount and/or sling loop and any wear and tear from use Always have your weapon in the SAFE position when not being fired Always follow all firearms safety rules and never point your weapon at anything you are not willing to destroy -CALIFORNIA PROPOSITION 65 WARNING:- WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
54.9 GBP 3 £54.90 *
Delivery time approx. 7-14 days.
3 pcs. in the USA warehouse
Specs: Color: Flat Dark Earth Make: AR-15

Top takeaways

  1. The Strike Industries Ultralight Multi-Function End Plate and Anti-Rotation Castle Nut are made from anodized 7075-T6 aluminum and are designed to securely update the AR's castle nut and endplate system without peening.
  2. Features include a built-in anti-rotation QD socket and sling loops, a reversible end plate for sling loop orientation, and set screws for ease of installation and multiple uses.
  3. Compatible with Mil-Spec AR-15 and AR-10 receivers, this hardware set also comes with Loctite® Threadlocker Blue 242® and a warning to regularly check the QD mount and sling loop for proper function and wear.

Attributes

Colour: Flat Dark Earth Make: AR-15 Delivery weight: 0.032kg Shipping height: 152mm Shipping width: 13mm Shipping length: 114mm UPC : 793811764482

Item details

US export classification: 0A501.x




Upgrade your AR-15 with the Ultralight Multi-Function End Plate & Anti-Rotation Castle Nut. 🛠️ Lightweight, durable, and customizable!

The Strike Industries Ultralight Multi-Function End Plate and Anti-Rotation Castle Nut are designed to update and upgrade the often neglected castle nut and endplate system. Now available in an ultralight 7075-T6 aluminum version that is anodized in color options to customize the look of your AR. While the traditional endplate and castle nut works extremely well in retaining your receiver extension, the peening of the castle nut is not conducive to rebuilding or upgrading. With the vast amount of aftermarket support for the AR system today, SI feels that there’s a need for a secure system as adaptive as you are. Enter the MFEP and ACN. The SI MFEP and ACN offers a built-in anti-rotation QD socket and sling loops. The MFEP is reversible to orientate sling loops to desired side. The Anti-Rotation Castle Nut (ACN) is specifically designed to work with the Multi-Function End Plate (MFEP). Instead of peening the endplate to secure the castle nut, a set screw fulfills this function to allow for multiple uses as you upgrade or update your build. Also never worry about finding a flying takedown pin detent and spring again as there is an included set screw on the MFEP for ease of installation or removal. Consider the Strike Industries Ultralight Multi-Function End Plate and Black Anti-Rotation Castle Nut for your next build or upgrade for both functionality and form of your AR-15 and/or AR-10. Product Contents: x1 Multi-function end plate x1 Anti-rotation castle nut x1 Set screw for anti-rotation x1 Set screw for detent and spring x1 Loctite® Threadlocker Blue 242® x1 Warning card Product Features: End plate set screw to retain takedown pin detent and spring for ease of installation or removal Multi-Function End Plate is reversible to orientate sling loops to desired side No peening or staking needed with the Anti-Rotation Castle Nut and Multi-Function End Plate design Anti-rotation QD socket Multiple sling loop attachment points Ultralight anodized 7075-T6 aluminum construction COMPATIBILITY: Mil-Spec AR-15 and AR-10 ArmaLite/DPMS pattern upper receivers Torque: Do not exceed 35 ft/lbs (47.45 nM) for the castle nut DISCLAIMER: Anodized areas that touch between end plate and castle nut will have expected minor scratches from torqueing of castle nut Due to numerous factors that take place during the anodization process, the color lines from batch to batch of a certain product may vary WARNING: Before every use, always check proper function of your QD mount and/or sling loop and any wear and tear from use Always have your weapon in the SAFE position when not being fired Always follow all firearms safety rules and never point your weapon at anything you are not willing to destroy -CALIFORNIA PROPOSITION 65 WARNING:- WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
0
In stock
£34.90 £34.90 - £43.90
Back to top