Break Sharp Edges On Rifle & Handgun Muzzles; Get Faster Cylinder Filling On Revolvers
45° chamfering cutter breaks the edges of the rifling for a clean bullet exit or chamfers revolver cylinder chamber mouths for quick reloads. Includes the cutter, a handle and one pilot, all in a polypropylene box. Interchangeable pilot keeps cutter properly aligned. Purchase extra pilots to use one cutter for many different calibers. Pilots for other calibers available separately. The 45° Cutter supplied in Sets marked with an * is 5/8" dia. to correctly chamfer the larger barrel and cylinder mouths on those calibers. All other Sets have a ½" diameter, 45° cutter.
Select one of the following for other rifle/handgun muzzles, cylinder facing & chamfering tools.
SPECS: Chamfer Cutter Hardened steel. 3¼" (8.25cm) long (except .165" cutter, 2-3/8" (6cm) long). ½" (12.7mm) or 5/8" (15.8mm) diameter as required. Handle Aluminum. 3½" (8.9cm) long. 3 oz. (85 g). Pilot Brass. 1¼" (3.2cm) long. .45 ACP Pilots - .45 ACP-1 fits S&W model 25 & 625. .45 ACP-2 fits Colt 1917. Packaged in a polypropylene box.
More...
Customer ratings for BROWNELLS 45° CUTTER & BRASS PILOT FOR .416 MUZZLE*
Number of ratings: 2
From brownells.com: 2
Average rating: 3
Should work, but doesn't(06/06/2016)
I've ordered 79 degree and 90 degree cutter from Brownell's, and have had great success with them. But for whatever reason, I've had no luck with 45 degree cutter. I literally cannot get it to cut in any way whatsoever, either by hand or drill press. The Allen screw to hold the pilot stripped on the first use as well, making it impossible to secure the pilot to the cutter. I have no idea how but 45 degree cutter is not in the same league as the other two I've bought.
Perfect fit for Ruger rimfire barrels(30/03/2016)
Called the Brownells tech and asked what size I should get for my 10/22 Ruger. They couldn't tell me from experience and suggested I slug my barrel. (you want the largest that will fit to eliminate chatter) Brownells offers 3 sizes for the 22 rimfire, .210, .211 and this .215. Not knowing which size, I tried every round object I had on hand and finally came up with a screw shank that mic'd exactly .215-perfect! So that's what I ordered. It only took maybe 3 revolutions total to get the bevel I was looking for. Oiled it up well, a couple light turns (could feel it cutting), pulled it out, cleared the chips with spray degreaser, re-oiled and one last LIGHT pass did it!
Product no.: 080948417 BROWNELLS 45° CUTTER & BRASS PILOT FOR .416 MUZZLE*050806013377 45° chamfering cutter breaks the edges of the rifling for a clean bullet exit or chamfers revolver cylinder chamber mouths for quick reloads. Includes the cutter, a handle and one pilot, all in a polypropylene box. Interchangeable pilot keeps cutter properly aligned. Purchase extra pilots to use one cutter for many different calibers. Pilots for other calibers available separately. The 45° Cutter supplied in Sets marked with an * is 5/8" dia. to correctly chamfer the larger barrel and cylinder mouths on those calibers. All other Sets have a ½" diameter, 45° cutter.
The Brownells 45° Muzzle/Cylinder Chamfering Cutter & Brass Pilot is designed to chamfer .416 caliber rifle barrels and revolver cylinder mouths for clean bullet exit and faster reloads.
The set includes a chamfer cutter, handle, one brass pilot, and comes in a polypropylene box, with additional pilots available for various calibers.
The cutter size is 5/8" for the .416 caliber, made of hardened steel, with an aluminum handle and brass pilot, ensuring precise alignment and durability.
Product no.: 080948213 BROWNELLS 45 CUTTER & BRASS PILOT FOR .22 RF MUZZLE (.213")050806013162 45° chamfering cutter breaks the edges of the rifling for a clean bullet exit or chamfers revolver cylinder chamber mouths for quick reloads. Includes the cutter, a handle and one pilot, all in a polypropylene box. Interchangeable pilot keeps cutter properly aligned. Purchase extra pilots to use one cutter for many different calibers. Pilots for other calibers available separately. The 45° Cutter supplied in Sets marked with an * is 5/8" dia. to correctly chamfer the larger barrel and cylinder mouths on those calibers. All other Sets have a ½" diameter, 45° cutter.
The 45° chamfering cutter set is designed to clean the edges of rifling and chamfer revolver cylinder chambers, enhancing bullet exit and reload speed.
It includes a cutter, handle, and brass pilot for .22 caliber, with additional pilots available for various calibers, all contained in a polypropylene box.
Constructed with a hardened steel cutter, aluminum handle, and brass pilot, the set is robust and sized to fit specific calibers, with the 45° cutter available in either ½" or 5/8" diameter.
Product no.: 080948224 BROWNELLS 45 CUTTER & BRASS PILOT FOR .22 RF MUZZLE (.215")050806013179 45° chamfering cutter breaks the edges of the rifling for a clean bullet exit or chamfers revolver cylinder chamber mouths for quick reloads. Includes the cutter, a handle and one pilot, all in a polypropylene box. Interchangeable pilot keeps cutter properly aligned. Purchase extra pilots to use one cutter for many different calibers. Pilots for other calibers available separately. The 45° Cutter supplied in Sets marked with an * is 5/8" dia. to correctly chamfer the larger barrel and cylinder mouths on those calibers. All other Sets have a ½" diameter, 45° cutter.
The 45° chamfering cutter is designed to cleanly break the edges of rifling and chamfer revolver cylinder chamber mouths for faster reloading.
It comes with a handle, one brass pilot for .22 caliber, and is packaged in a polypropylene box, with additional pilots available for various calibers.
The set includes a hardened steel cutter, an aluminum handle, and a brass pilot, with specific size variations for different calibers and firearm models.
Product no.: 080948380 BROWNELLS 45° CUTTER & BRASS PILOT FOR .38/.357 MUZZLE050806013315 45° chamfering cutter breaks the edges of the rifling for a clean bullet exit or chamfers revolver cylinder chamber mouths for quick reloads. Includes the cutter, a handle and one pilot, all in a polypropylene box. Interchangeable pilot keeps cutter properly aligned. Purchase extra pilots to use one cutter for many different calibers. Pilots for other calibers available separately. The 45° Cutter supplied in Sets marked with an * is 5/8" dia. to correctly chamfer the larger barrel and cylinder mouths on those calibers. All other Sets have a ½" diameter, 45° cutter.
The Brownells 45° Cutter & Brass Pilot is designed for chamfering .38/.357 caliber muzzle and cylinder chambers, aiding in clean bullet exits and quick reloads.
The set includes a chamfer cutter, handle, one brass pilot, and is packaged in a polypropylene box, with additional pilots available for various calibers.
Cutters come in either ½" or 5/8" diameter, with the larger size intended for chamfering bigger barrel and cylinder mouths.
Product no.: 080948381 BROWNELLS 45° CUTTER & BRASS PILOT FOR .38/.357 CYLINDER050806013322 45° chamfering cutter breaks the edges of the rifling for a clean bullet exit or chamfers revolver cylinder chamber mouths for quick reloads. Includes the cutter, a handle and one pilot, all in a polypropylene box. Interchangeable pilot keeps cutter properly aligned. Purchase extra pilots to use one cutter for many different calibers. Pilots for other calibers available separately. The 45° Cutter supplied in Sets marked with an * is 5/8" dia. to correctly chamfer the larger barrel and cylinder mouths on those calibers. All other Sets have a ½" diameter, 45° cutter.
Product no.: 080948384 BROWNELLS 45° CUTTER & BRASS PILOT FOR .38-40 MUZZLE050806013339 45° chamfering cutter breaks the edges of the rifling for a clean bullet exit or chamfers revolver cylinder chamber mouths for quick reloads. Includes the cutter, a handle and one pilot, all in a polypropylene box. Interchangeable pilot keeps cutter properly aligned. Purchase extra pilots to use one cutter for many different calibers. Pilots for other calibers available separately. The 45° Cutter supplied in Sets marked with an * is 5/8" dia. to correctly chamfer the larger barrel and cylinder mouths on those calibers. All other Sets have a ½" diameter, 45° cutter.
The 45° chamfering cutter is designed to break the edges of rifling and chamfer revolver cylinder chamber mouths for clean bullet exit and quick reloads.
It comes with a handle, one brass pilot for .38-40 caliber, and is housed in a polypropylene box, with additional pilots available for various calibers.
The kit includes a hardened steel cutter, an aluminum handle, and a brass pilot, with specific sizes and pilots for different revolver models and calibers.
Product no.: 080948400 BROWNELLS 45° CUTTER & BRASS PILOT FOR .40/10MM MUZZLE050806013346 45° chamfering cutter breaks the edges of the rifling for a clean bullet exit or chamfers revolver cylinder chamber mouths for quick reloads. Includes the cutter, a handle and one pilot, all in a polypropylene box. Interchangeable pilot keeps cutter properly aligned. Purchase extra pilots to use one cutter for many different calibers. Pilots for other calibers available separately. The 45° Cutter supplied in Sets marked with an * is 5/8" dia. to correctly chamfer the larger barrel and cylinder mouths on those calibers. All other Sets have a ½" diameter, 45° cutter.
The 45° muzzle/cylinder chamfering cutter set is designed for clean bullet exits and quick cylinder reloads, including a cutter, handle, and a brass pilot for .40/10mm calibers.
Interchangeable pilots allow the use of one cutter for multiple calibers, with additional pilots available for separate purchase.
The set comes in a polypropylene box with the cutter size varying between ½" and 5/8" depending on the caliber, and is made of hardened steel and aluminum for durability.
Product no.: 080948410 BROWNELLS 45° CUTTER & BRASS PILOT FOR .41 MUZZLE*050806013353 45° chamfering cutter breaks the edges of the rifling for a clean bullet exit or chamfers revolver cylinder chamber mouths for quick reloads. Includes the cutter, a handle and one pilot, all in a polypropylene box. Interchangeable pilot keeps cutter properly aligned. Purchase extra pilots to use one cutter for many different calibers. Pilots for other calibers available separately. The 45° Cutter supplied in Sets marked with an * is 5/8" dia. to correctly chamfer the larger barrel and cylinder mouths on those calibers. All other Sets have a ½" diameter, 45° cutter.
Product no.: 080948456 BROWNELLS 45° CUTTER & BRASS PILOT FOR .45 ACP-2 CYLINDER*050806013445 45° chamfering cutter breaks the edges of the rifling for a clean bullet exit or chamfers revolver cylinder chamber mouths for quick reloads. Includes the cutter, a handle and one pilot, all in a polypropylene box. Interchangeable pilot keeps cutter properly aligned. Purchase extra pilots to use one cutter for many different calibers. Pilots for other calibers available separately. The 45° Cutter supplied in Sets marked with an * is 5/8" dia. to correctly chamfer the larger barrel and cylinder mouths on those calibers. All other Sets have a ½" diameter, 45° cutter.
The 45° MUZZLE/CYLINDER CHAMFERING CUTTER & BRASS PILOT BROWNELLS kit is designed to chamfer the edges of rifling and revolver cylinder chamber mouths for improved bullet exit and quicker reloads.
It includes a handle, cutter, one pilot, and is packaged in a polypropylene box, with additional pilots available for various calibers.
The kit features a hardened steel chamfer cutter, an aluminum handle, and a brass pilot, with the .45 ACP-2 pilot specifically fitting the Colt 1917.
Product no.: 080948480 BROWNELLS 45° CUTTER & BRASS PILOT FOR .480 RUGER MUZZLE*050806013469 45° chamfering cutter breaks the edges of the rifling for a clean bullet exit or chamfers revolver cylinder chamber mouths for quick reloads. Includes the cutter, a handle and one pilot, all in a polypropylene box. Interchangeable pilot keeps cutter properly aligned. Purchase extra pilots to use one cutter for many different calibers. Pilots for other calibers available separately. The 45° Cutter supplied in Sets marked with an * is 5/8" dia. to correctly chamfer the larger barrel and cylinder mouths on those calibers. All other Sets have a ½" diameter, 45° cutter.
The 45° MUZZLE/CYLINDER CHAMFERING CUTTER & BRASS PILOT by BROWNELLS is designed to chamfer the edges of rifling and revolver cylinder chambers for improved bullet exit and faster reloading.
This tool set includes a chamfer cutter, handle, one brass pilot, and is packaged in a durable polypropylene box, with additional pilots available for various calibers.
The kit features a hardened steel cutter, an aluminum handle, and a brass pilot, with the cutter size being ½" or 5/8" in diameter depending on the set, specifically tailored for .480 Ruger caliber.
Product no.: 080948501 BROWNELLS 45° CUTTER & BRASS PILOT FOR .50 S&W MUZZLE*050806013483 45° chamfering cutter breaks the edges of the rifling for a clean bullet exit or chamfers revolver cylinder chamber mouths for quick reloads. Includes the cutter, a handle and one pilot, all in a polypropylene box. Interchangeable pilot keeps cutter properly aligned. Purchase extra pilots to use one cutter for many different calibers. Pilots for other calibers available separately. The 45° Cutter supplied in Sets marked with an * is 5/8" dia. to correctly chamfer the larger barrel and cylinder mouths on those calibers. All other Sets have a ½" diameter, 45° cutter.
The 45° Cutter & Brass Pilot is designed for chamfering .50 S&W muzzle and revolver cylinder mouths to facilitate clean bullet exit and quick reloads.
It includes a steel cutter, aluminum handle, and a brass pilot, all packaged in a polypropylene box, with additional pilots available for various calibers.
The kit comes with either a ½" or 5/8" diameter cutter depending on the set, and is specifically manufactured by BROWNELLS for durability and precision.
Product no.: 080948503 BROWNELLS 45° CUTTER & BRASS PILOT FOR .50 BMG/BP MUZZLE*050806013506 45° chamfering cutter breaks the edges of the rifling for a clean bullet exit or chamfers revolver cylinder chamber mouths for quick reloads. Includes the cutter, a handle and one pilot, all in a polypropylene box. Interchangeable pilot keeps cutter properly aligned. Purchase extra pilots to use one cutter for many different calibers. Pilots for other calibers available separately. The 45° Cutter supplied in Sets marked with an * is 5/8" dia. to correctly chamfer the larger barrel and cylinder mouths on those calibers. All other Sets have a ½" diameter, 45° cutter.
Product no.: 080948481 BROWNELLS 45° CUTTER & BRASS PILOT FOR .480 RUGER CYLINDER*050806013476 45° chamfering cutter breaks the edges of the rifling for a clean bullet exit or chamfers revolver cylinder chamber mouths for quick reloads. Includes the cutter, a handle and one pilot, all in a polypropylene box. Interchangeable pilot keeps cutter properly aligned. Purchase extra pilots to use one cutter for many different calibers. Pilots for other calibers available separately. The 45° Cutter supplied in Sets marked with an * is 5/8" dia. to correctly chamfer the larger barrel and cylinder mouths on those calibers. All other Sets have a ½" diameter, 45° cutter.
Break Sharp Edges On Rifle & Handgun Muzzles; Get Faster Cylinder Filling On Revolvers
45° chamfering cutter breaks the edges of the rifling for a clean bullet exit or chamfers revolver cylinder chamber mouths for quick reloads. Includes the cutter, a handle and one pilot, all in a polypropylene box. Interchangeable pilot keeps cutter properly aligned. Purchase extra pilots to use one cutter for many different calibers. Pilots for other calibers available separately. The 45° Cutter supplied in Sets marked with an * is 5/8" dia. to correctly chamfer the larger barrel and cylinder mouths on those calibers. All other Sets have a ½" diameter, 45° cutter.
Select one of the following for other rifle/handgun muzzles, cylinder facing & chamfering tools.
SPECS: Chamfer Cutter Hardened steel. 3¼" (8.25cm) long (except .165" cutter, 2-3/8" (6cm) long). ½" (12.7mm) or 5/8" (15.8mm) diameter as required. Handle Aluminum. 3½" (8.9cm) long. 3 oz. (85 g). Pilot Brass. 1¼" (3.2cm) long. .45 ACP Pilots - .45 ACP-1 fits S&W model 25 & 625. .45 ACP-2 fits Colt 1917. Packaged in a polypropylene box.
More...
Customer ratings for BROWNELLS 45° CUTTER & BRASS PILOT FOR .416 MUZZLE*
Number of ratings: 2
From brownells.com: 2
Average rating: 3
Should work, but doesn't(06/06/2016)
I've ordered 79 degree and 90 degree cutter from Brownell's, and have had great success with them. But for whatever reason, I've had no luck with 45 degree cutter. I literally cannot get it to cut in any way whatsoever, either by hand or drill press. The Allen screw to hold the pilot stripped on the first use as well, making it impossible to secure the pilot to the cutter. I have no idea how but 45 degree cutter is not in the same league as the other two I've bought.
Perfect fit for Ruger rimfire barrels(30/03/2016)
Called the Brownells tech and asked what size I should get for my 10/22 Ruger. They couldn't tell me from experience and suggested I slug my barrel. (you want the largest that will fit to eliminate chatter) Brownells offers 3 sizes for the 22 rimfire, .210, .211 and this .215. Not knowing which size, I tried every round object I had on hand and finally came up with a screw shank that mic'd exactly .215-perfect! So that's what I ordered. It only took maybe 3 revolutions total to get the bevel I was looking for. Oiled it up well, a couple light turns (could feel it cutting), pulled it out, cleared the chips with spray degreaser, re-oiled and one last LIGHT pass did it!