Edgewood front bags are constructed much like the rear bags with reinforced leather sides and heavy duty nylon tops. The inside corners feature sewnin nylon inserts to prevent the material from rolling under the stock. All Edgewood Front Bags are available for hunter stocks widths (2¼") or Benchrest stock widths (3"). Each of the two widths are offered in four different styles: Standard Bag, features ½" leather flaps extending along the bottom edges to be pinned under your rest top retaining bars. Or the flaps may be punched, notched, or cut away all together to custom fit your rest. Standard Bag w/reinforced top, has an extra thick top to hold desired forend shape. Farley Bag, which is narrower than the Standard Bag from front to back to specifically fit the Farley Co-Axial and Co-Axial II rests only. Farley Bag w/reinforced top, has an extra thick top to hold desired forend shape. These bags fit old style pre-2009 Farley tops only. New style bags also available.
Customer ratings for EDGEWOOD SHOOTING BAGS STANDARD FRONT REST 3" VARMINT W/REINFORCED TOP 3M SLICK
Number of ratings: 2
From brownells.com: 2
Average rating: 4.5
Buy this one first(02/08/2010)
Do you want the reinforcement of this bag? You sure do. I have use three other front bags. All tend to sag to one side and let the rifle tilt. The extra support this front bg gives is perfect and eliminates any problems. Yes, if you are sitting there wondering, buy this one first.
Quality product, but needs tweaking(10/03/2011)
This Edgewood front bag is used in Caldwell Rock BR Rest, set up for an Anschutz Benchrest Mod.1913 with a 3" forend - some minor trimming was needed to get proper fit with the rest. The quality & workmanship is excellent - it is relatively expensive, but you get what you pay for - up to a point. After the first few times of use, I did find that the sand filling tended to form a hump where the bottom of the rifle's forend meets the bottom of the bag. Reducing the amount of fill solved this problem but caused another - that of floppy ears. This can be overcome by massaging the fill every couple of weeks but it is a bit irritating. The ideal front bag would have separate compartments for ears & base - like most quality rear bags - but I'm not aware of any front bags on the market with this feature. Also, if I could have my druthers, I would prefer the ears to be a little higher, but this is a complaint I have with other makes too. Overall though, a very well-made product that should give years of use.
Product no.: 100045621 EDGEWOOD SHOOTING BAGS STANDARD FRONT REST 3" VARMINT W/REINFORCED TOP 3M SLICK Mfr Part: COMMON 3 IN W/ Edgewood front bags are constructed much like the rear bags with reinforced leather sides and heavy duty nylon tops. The inside corners feature sewnin nylon inserts to prevent the material from rolling under the stock. All Edgewood Front Bags are available for hunter stocks widths (2¼") or Benchrest stock widths (3"). Each of the two widths are offered in four different styles: Standard Bag, features ½" leather flaps extending along the bottom edges to be pinned under your rest top retaining bars. Or the flaps may be punched, notched, or cut away all together to custom fit your rest. Standard Bag w/reinforced top, has an extra thick top to hold desired forend shape. Farley Bag, which is narrower than the Standard Bag from front to back to specifically fit the Farley Co-Axial and Co-Axial II rests only. Farley Bag w/reinforced top, has an extra thick top to hold desired forend shape. These bags fit old style pre-2009 Farley tops only. New style bags also available.
Edgewood Front Benchrest Bags are made with reinforced leather sides, heavy-duty nylon tops, and have internal nylon inserts to prevent material roll-under.
The Standard Front Rest 3" Varmint comes with a reinforced top for maintaining forend shape and is designed to fit benchrest stock widths.
Bags are delivered unfilled, requiring Extra Heavy Bag Sand for use, and are compatible with various rest tops through modifiable flaps.
Attributes
Colour:
Black/ Tan
Material:
Leather,3M Slick
Style:
Front Bag,Rest Top
Delivery weight: 0.091kgShipping height: 102mmShipping width: 102mmShipping length: 178mm
Item details
Made in USA
Product no.: 749006368 EDGEWOOD SHOOTING BAGS STANDARD FRONT BAG, 3" FOREND Mfr Part: STANDARD FRONT Standard Front Bag, 3" Forend
Product no.: 749009464 EDGEWOOD SHOOTING BAGS STANDARD FRONT BAG REINFORCED TOP, 2-1/4" FOREND Mfr Part: 2-1/4 STANDAR Standard Front Bag reinforced top, 2-1/4" Forend
Product no.: 749009465 EDGEWOOD SHOOTING BAGS STANDARD FRONT BAG REINFORCED TOP, 3" FOREND Mfr Part: 3 STANDARD W/ Standard Front Bag reinforced top, 3" Forend
109.9GBP11£109.90
*
Delivery time approx. 7-14 days. More than 10 pieces in USA warehouse
Specs:Color: BlackMaterial: LeatherStyle: Rest Top
Product no.: 100045622 EDGEWOOD SHOOTING BAGS STANDARD FRONT REST 2-1/4" HUNTER W/REINFORCED TOP SLICK Mfr Part: COMMON 2 1/4 IN Edgewood front bags are constructed much like the rear bags with reinforced leather sides and heavy duty nylon tops. The inside corners feature sewnin nylon inserts to prevent the material from rolling under the stock. All Edgewood Front Bags are available for hunter stocks widths (2¼") or Benchrest stock widths (3"). Each of the two widths are offered in four different styles: Standard Bag, features ½" leather flaps extending along the bottom edges to be pinned under your rest top retaining bars. Or the flaps may be punched, notched, or cut away all together to custom fit your rest. Standard Bag w/reinforced top, has an extra thick top to hold desired forend shape. Farley Bag, which is narrower than the Standard Bag from front to back to specifically fit the Farley Co-Axial and Co-Axial II rests only. Farley Bag w/reinforced top, has an extra thick top to hold desired forend shape. These bags fit old style pre-2009 Farley tops only. New style bags also available.
Edgewood front bags are constructed much like the rear bags with reinforced leather sides and heavy duty nylon tops. The inside corners feature sewnin nylon inserts to prevent the material from rolling under the stock. All Edgewood Front Bags are available for hunter stocks widths (2¼") or Benchrest stock widths (3"). Each of the two widths are offered in four different styles: Standard Bag, features ½" leather flaps extending along the bottom edges to be pinned under your rest top retaining bars. Or the flaps may be punched, notched, or cut away all together to custom fit your rest. Standard Bag w/reinforced top, has an extra thick top to hold desired forend shape. Farley Bag, which is narrower than the Standard Bag from front to back to specifically fit the Farley Co-Axial and Co-Axial II rests only. Farley Bag w/reinforced top, has an extra thick top to hold desired forend shape. These bags fit old style pre-2009 Farley tops only. New style bags also available.
Customer ratings for EDGEWOOD SHOOTING BAGS STANDARD FRONT REST 3" VARMINT W/REINFORCED TOP 3M SLICK
Number of ratings: 2
From brownells.com: 2
Average rating: 4.5
Buy this one first(02/08/2010)
Do you want the reinforcement of this bag? You sure do. I have use three other front bags. All tend to sag to one side and let the rifle tilt. The extra support this front bg gives is perfect and eliminates any problems. Yes, if you are sitting there wondering, buy this one first.
Quality product, but needs tweaking(10/03/2011)
This Edgewood front bag is used in Caldwell Rock BR Rest, set up for an Anschutz Benchrest Mod.1913 with a 3" forend - some minor trimming was needed to get proper fit with the rest. The quality & workmanship is excellent - it is relatively expensive, but you get what you pay for - up to a point. After the first few times of use, I did find that the sand filling tended to form a hump where the bottom of the rifle's forend meets the bottom of the bag. Reducing the amount of fill solved this problem but caused another - that of floppy ears. This can be overcome by massaging the fill every couple of weeks but it is a bit irritating. The ideal front bag would have separate compartments for ears & base - like most quality rear bags - but I'm not aware of any front bags on the market with this feature. Also, if I could have my druthers, I would prefer the ears to be a little higher, but this is a complaint I have with other makes too. Overall though, a very well-made product that should give years of use.